ShinewayTech DPM-50 RF 인라인 디지털 전력계 (300-4200MHz)

Average Power Measurement: 

Frequency Range: 300-4200MHz

Power Range: 100mW-200W

Dynamic Range (dB): ≥33

Insertion Loss (dB): ≤0.1

VSWR: 1.05 to 99.9

Directivity: ≥30 (<3GHz); ≥28 (>3GHz)

Accuracy: ±4%+0.05W (0℃~+15℃ or +35℃~+50℃ increase 3%)

Impedance: 50Ω

Connector: N (Female)

Data Interface: USB

DPM Interface: DB9

Peak Power Measurement: 

Peak Power Range: 100mW to 500W

Peak Power Accuracy: Burst width >200us: ±7%; 1us<Burst width< 200us: ±10%; 0.5us<Burst width< 1us: ±15%; Burst width< 0.5us: ±20%; NOTE: lower 700MHz or higher 3300MHz, increase +3% lower 15℃ or higher 35℃, increase +3%;  Duty Cycle lower 0.1,increase +0.1W; Frequency  lower 10HZ, +( 1.5%+0.15W)

Peak Average Ratio: 0 to12dB

CCDF: 

Measurement Range: 0.1 to 100%

Measurement Accuracy: ±3%

Threshold Measurement Range: 0.05W to 500W

Burst Power: 

Burst Power Range: 100mW to 200W 

Burst Width: 1us to 60ms

Min. Measurement Frequency: 15HZ

Measurement Accuracy: ±6% +0.05W (0℃ to +15℃ or +35℃ to +50℃, increase +3%) Note：lower 700MHz or higher 3300MHz, increase +3%

Duty Cycle: 0.0001 to 1

General Specifications: 

Power Supply (Monitor): NiMH Battery/ AC Adaptor

Operating Temperature: -10℃ to 50℃

Storage Temperature: -20℃ to 70℃

Relative Humidity: 0 to 85% (Non-condensing)

Weight: 480g (Sensor)/ 900g (Handheld monitor)

Dimensions (H×W×T): 130×(95)×124×34mm (Sensor); 220×110×70mm (Handheld monitor)

Ordering Information

Standard Package:

DPM sensor, USB cable, Software CD, Soft carry bag, Warranty card, CE certificate, Certificate of calibration, User’s manual.

Datasheet