SI ANALYTICS ProLab 2000 멀티 파라미터 계측기

ModeL: ProLab 1000 (Order no. 285201710)
Manufacturer:SI ANALYTICS
Warranty: 12 months
Origin: Germany
pH measurement:
- Range / Accuracy: -2.000 … +20.000 pH / -2.00 … +20.00 pH/0.001 / 0.01 pH
- Accuracy (for each measuring area) (± 1 digit): ± 0.003 pH/± 0.01 pH
- Calibration: pre-programmed pH buffer sets: 22
- Automatic buffer recognition and display: Yes
- pH calibration points max: 5
mV measurement:
- Range/Accuracy - 1,999.9 to + 1,999.9 mV; - 1,999 to + 1,999 mV
- Accuracy (for each measuring area) (± 1 digit): ± 0.2 mV/± 1 mV
- AutoRange function (can be switched off): yes
ISE measurement:
- Range / Accuracy: 0.000 … 10,000 mg/l / 0.00 … 100.00 mg/l / 0.0 … 100.0 mg/l / 0 … 2000 mg/l
- Display in %, ppm, mg/kg, mol/l
- Two separate ISE channels (with dedicated separate temperature channels)
- Methods
- ISE calibration points: 2 to 3
- Standard concentrations:0.01 … 10 000 mg/l
- Control of external burettes TITRONIC® universal/ 110plus / 500.
Conductivity measurement:
- Range / Accuracy: 0.000 … 2.000 S/cm/0.00 … 20.00 S/cm/0.0 … 200.0 S/cm/0 … 2000S/cm/0.00 … 20.00 mS/cm/0.0 … 200.0 mS/cm … 0 … 2000 mS/cm
- Solution: 0.001 / 0.01 / 0.1 / 1 S/cm / 0.01 / 0.1 / 1 mS/cm
- Accuracy (± 1 digit): 0.5%
- Calibrated cell constant 0.450 to 0.500 cm-1; 0.585 to 0.715 cm-1; 0.800 to 1.200 cm-1(calibration with control standard) d 0.01 mol KCl:
- Adjustable cell constant 0.250 to 2.500 cm-1 and 0.090 to 0.110 cm-1
TDS measurement:
- Range/Accuracy 0 … 2000 mg/l/±1

One for all – pH, ISE, oxygen and conductivity with only one instrument

Up to four parameters can be measured and displayed at the same time. The selection of the parameters is menu-driven.

·          Electrode and user identification – highest safety
Every stored measuring result shows the used ID-electrode and the user. The calibration data are stored in the ID-sensor. Therefore even when using multiple ID-electrodes on the same meter, the correct calibration data is always always chosen automatically.

·          Professional measurement
With a measuring range from -2.000 to +20.000 pH and an accuracy of 0.003 pH, the automated calibration with up to 5 points (pH and ISE) and the automatic buffer recognition out of 22 buffer sets.

·          The new combined sensor LFOX 1400 ID is included

A sensor with ID function for three parameters: conductivity, dissolved oxygen and temperature. The oxygen module can be easily removed and works according to the time-proven and reliable galvanic principle. Immediately ready for use, little maintenance required.
The conductivity sensor features the time-proven 4-electrode system.

Detailed Information about the ProLab 2000 you will locate at our laboratory products catalog download PDF file (extract)

Technical Specifications pH Meter ProLab download PDF file

How to find the best meter? Lab and ProLab laboratory meters download PDF file