SOLO SMOKESABRE-01-001 휴대용 연기 감지기 테스트 분무기 (Chai tạo khói, 150ml)

Manufacturer: SOLO

Model: SMOKESABRE-01-001

Origin: Netherlands

Warranty: 12 months

More tests per can

Faster detector activation and clearing

Lowest cost per test

The end of harmful residue – risk is designed out with the sabre

Silicone free testing

Eco-responsibility 100% bio-degradable sabre, ozone friendly, no CFCs and low GWP

Detector manufacturer endorsement

UL and ULC listed

150ml can

include: 1 x SMOKESABRE

Smoke Sabre Hand Held Smoke Detector Tester 150ml

Smoke Sabre is a major step forward in the design of smoke detector testers. 

All other pressurized aerosol smoke alarm testers have the inherent drawback that, if misused, 

they leave harmful residue on the casing and / or inside the chamber of the detector.

This residue can discolour the detector plastic, can attract dust, affect sensitivity and, in some cases, 

lead to corrosion, cracking or even complete failure of the detector. Residue occurs when testing aerosols 

are used too close to the detector, or smoke alarm, despite instructions not to do so. Smoke Sabre cannot 

be used too close to the detector and eliminates harmful residue while focusing and targeting the canned smoke test gas. 

When Smoke Sabre is in the closed position the sabre prevents access to the spray button.

The aerosol can only be activated when the sabre is fully extended. In use, air is drawn through the holes in the sabre and this, 

coupled with the venturi effect involved, assists the velocity and vaporization process of the airborne 'smoke' particles. 

The result is a more effective test, delivering better detector activation, using less gas per test, and reducing costs while 

eliminating harmful residue.

Datasheet