빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Standard Interfaces: WatchDog weather station, FieldScout Soil Sensor Reader
Connector: 2.5mm stereo pin
Range:
VWC: 0% to saturation
EC: 0 to 10 mS/cm
Temp: -60 to 185°F (-50 to 85°C)
Resolution:
VWC: 0.1%
EC: 0.01 mS/cm
Temp: 0.1°F (0.1°C)
Power: 3V @ 6 to 10mA
Output: Analog voltage, time division multiplexed.
Oscillator Frequency: 80 MHz
Accuracy:
VWC: 3% @ EC < 8 mS/cm
EC: ±2%
Temp:
± 1°F (0.6°C), T > -25°F (-30°C)
±1.5°F (0.6°C), T < -25°F (-30°C)
Sensor Dimensions: 2.8 in. (7 cm) x 1.2 in. (3 cm)
Cable length: 6 ft, extendable up to 50 ft.
Manual
Catalogue
Tech Bulletin
WaterScout SMEC300 measures Soil Moisture, Electroconductivity (EC/Salts) and Temperature. Whether you are measuring potted plants in a greenhouse or turf on a putting green, knowing the salinity of the root zone is critical for healthy plant growth. Irrigation, fertilizers and crop depend all impact salt concentrations. High levels can damage the plant, low levels can lead to nutrient deficiencies. The SMEC300 sensor is a capacitance type soil moisture sensor. Carbon ink electrodes provide a large measuring surface for electrical conductivity (EC) and calibration is simple! You can connect up 4 sensors, depending on the weather station you are connecting to. Data can be read with the FieldScout Soil Sensor Reader (Item #6466) WatchDog App, SpecConnect, SpecWare (Includes a 6' (1.8m) Cable)
