Suneast ETS-300 Small Wave Soldering (7kW)

Dimension：LxWxH(mm):        3385x1240x1540

Weigh:        Approx.1150kg

Power Supply:        3PH  380V  50HZ

Startup Power:        28KW

Operation Powr Consumption:        7KW

Control System:        PC+PLC        

Spraying movement:        Step motor

Spray Pressure:        0.2Mpa~0.4Mpa

Flux Flow Arrange:        option        

Auto Fill Flux:        Standard        

Exhaust:        Top exhaust

ExhaustDucting Diameter(mm):        Φ250

Exhaust tan power:        370W

Preheating Mode:        IR

Control Mode:        PID        

Preheating Zone Number:        2        

Preheating Length(mm):        1500mm        

Preheating Temperature:        Room temperature~200℃

Warm-upTime(min):        Approx.12min (seting：150℃)

PCB Width(mm):        50~300

Convoyor Direction:        L→R (Option：R→L)

Conveyor Speed(mm/min):        500~1800

Conveyor Height(mm):        750±20

Available Component Heigh (mm):        Top 120, Bottom 15        

Conveyor Speed Control Mode:        Frequency converter closed-loop stepless speed regulation                

Fingers:        1.Heavy type double hook finger;  2.Light double hook finger (Option)

Conveyor Angle:        4~6°

Type of solder Pot:        Motor drive

Solder Pot Material:        Casting Iron

Wave Height Adjustment:        Digital Control by PC

Cooling Method:        Air cooling

Heater Power:        9KW        

Solder Pot Temperature:        300°C        

Solder Pot Capacity:        Approx.350KG

Wave Drive Power:        180W*2  3PH 220VAC

Solder Pot Warm-up Time:        Approx.150min (setting：250℃)

Temperature Control Mode:        PID        

Finger Cleaning System:        Brush

Datasheet