Name: TEKTRONIX AWG5002C 임의 함수 발생기
Brand: TEKTRONIX

혜택 소식 받아보기

대량 할인, 도매 가격 업데이트 및 신제품 소식을 이메일로 받아보세요.

구독하면 당사의 서비스 이용약관 및 개인정보 처리방침에 동의하는 것으로 간주됩니다.

빠른 지원

인증된 전문가에게 직접 연결

Characteristic

AWG5014C

AWG5012C

AWG5002C

Digital to Analog Converter

Sample rate

10 MS/s to 1.2 GS/s

10 MS/s to 600 MS/s

Resolution

14 bit

Sin (x)/x Roll-off

Sin (x)/x (–1 dB)

300 MHz

150 MHz

Sin (x)/x (–3 dB)

520 MHz

260 MHz

Characteristic

AWG5014C

AWG5012C

AWG5002C

Output Frequency Characteristics

Effective Frequency Output

Fmaximum (specified) is determined as "sample rate / oversampling rate" or "SR/2.5"

Fmaximum

480 MHz

240 MHz

Fmaximum (typical)

540 MHz

275 MHz

Effective Frequency Switching Time

Minimum frequency switching time from selected frequencies F₁ to F₂ is determined as "1/Fmaximum"

Standard

2.1 ns

4.2 ns

Ts (typical)

1.8 ns

3.7 ns

Modulation Bandwidth

Modulation bandwidth is a combination of sin(x)/x and rise time bandwidths, defined as the lower of the sin(x)/x bandwidth or the calculated percentage of rise time bandwidth (as shown)

Mod bandwidth (–1 dB) (typical)

–1 dB BW = 0.932 × (–1 dB TrBW)

Normal: Up to 130 MHz

Direct: Up to 180 MHz

Normal: Up to 100 MHz

Direct: Up to 130 MHz

Mod bandwidth (–3 dB) (typical)

–3 dB BW = 0.913 × (–3 dB TrBW)

Normal: Up to 230 MHz

Direct: Up to 300 MHz

Normal: Up to 180 MHz

Direct: Up to 230 MHz

Output Amplitude Characteristics

Amplitude

Amplitude levels are measured as single-ended outputs. Amplitude level will be 3 dBm higher when using differential (both) outputs

Range

Normal: –30 dBm to 17 dBm

Direct: –30 dBm to 0 dBm

Resolution

0.01 dB

Accuracy

At 0 dBm level, with no offset, ±0.3 dB

Output Flatness

Mathematically corrected for characteristic Sin (x)/x roll-off, uncorrected by external calibration methods

Flatness (typical)

±1.0 dB, from 10 MHz to 480 MHz

Digital Data Out (Option 03)

Number of outputs

14-bit output on Ch1 and Ch2 (28 total)

Output connector

SMB (rear panel), single ended

Output impedance

50 Ω

Digital Data Out Levels (into 50 Ω)

Window

–1.0 V to 2.7 V

Amplitude

0.1 V_p-p to 3.7 V_p-p

Resolution

10 mV

Accuracy

±(10% of setting + 120 mV)

Current (max)

±54 mA per channel

Rise/Fall time (20% to 80%)

300 ps (1.0 V_p-p, Hi: 1.0 V, Lo: 0 V)

Delay from marker

–41 ns to –82 ns

Skew between outputs

<400 ps="" p="">

Characteristic

AWG5014C

AWG5012C

AWG5002C

Data Rate Characteristics

Data Rate

Bit rate is determined as "sample rate / 4 points per cycle", allowing full impairment generation

Bit rate (typical)

300 Mb/s

150 Mb/s

Rise/Fall Time Characteristics

Rise/Fall Time

Rise/Fall time measured at 10% to 90% levels

Tr/Tf

Normal: 1.4 ns

Direct: 0.95 ns

Rise Time Bandwidth

Rise-time bandwidth converted from rise-time (0.34/Tr, assumed Gaussian transition) characteristics through analog output circuitry and cabling

Tr bandwidth (–1 dB) (typical)

Normal: 140 MHz

Direct: 210 MHz

Tr bandwidth (–3 dB) (typical)

Normal: 250 MHz

Direct: 370 MHz

Low-pass filter

Normal: Bessel Type, 50 and 100 MHz

Output Amplitude Characteristics

Amplitude

Amplitude levels are measured between differential outputs (+) and (–)

For single-ended output (+) the amplitude level will be one-half the levels below

Range

Normal: 40 mV_p-p to 9.0 V_p-p

Direct: 40 mV_p-p to 1.2 V_p-p

Resolution

1.0 mV

Accuracy

At 0.5 V, with no offset, ±(2% of amplitude ±2 mV)

Offset

Range

Normal: ±2.25 V

Resolution

1.0 mV

Accuracy

At minimum amplitude, ±(2.0% of offset ±10 mV)

Characteristic

AWG5014C

AWG5012C

AWG5002C

Output Distortion Characteristics

Spurious Free Dynamic Range (SFDR)

SFDR is determined as a function of the directly generated carrier frequency. Harmonics not included

SFDR (Direct) (typical)

Clock: 1.2 GS/s, 14-bit operation

Frequency: 10 MHz to 480 MHz

Level: 4 dBm (1 V_p-p)

Offset: None

Clock: 0.6 GS/s, 14-bit operation

Frequency: 10 MHz to 240 MHz

Level: 4 dBm (1 V_p-p)

Offset: None

DC to 10 MHz carrier

–70 dBc

–74 dBc

10 to 20 MHz carrier

–70 dBc

20 to 40 MHz carrier

–62 dBc

40 to 80 MHz carrier

–62 dBc

–57 dBc

80 to 150 MHz carrier

–58 dBc

–54 dBc

150 to 300 MHz carrier

–58 dBc

–54 dBc

300 to 480 MHz carrier

–56 dBc

Spurious Free Dynamic Range (SFDR)

When viewed as a modulation bandwidth and used with external frequency up-conversion, the specifications will hold and be independent of carrier frequency with proper conversion circuitry design. Harmonics not included

SFDR (Direct) (typical)

Clock: 1.2 GS/s, 14-bit operation

Modulation Bandwidth: Up to 180 MHz

Level: 4 dBm (1 V_p-p)

Offset: None

Clock: 0.6 GS/s, 14-bit operation

Modulation Bandwidth: Up to 130 MHz

Level: 4 dBm (1 V_p-p)

Offset: None

DC to 10 MHz bandwidth

–70 dBc

–74 dBc

DC to 20 MHz bandwidth

–70 dBc

DC to 40 MHz bandwidth

–62 dBc

DC to 80 MHz bandwidth

–62 dBc

–57 dBc

DC to 150 MHz bandwidth

–58 dBc

–54 dBc

DC to 180 MHz bandwidth

–58 dBc

Characteristic

AWG5014C

AWG5012C

AWG5002C

Harmonic Distortion

Clock: 1.2 GS/s, 14-bit operation

32-point waveform

37.5 MHz output

Normal: 10 dBm (2.0 V_p-p)

Direct: 0 dBm (0.6 V_p-p)

Offset: None

Clock: 0.6 GS/s, 14-bit operation

32-point waveform

18.7 MHz output

Normal: 10 dBm (2.0 V_p-p)

Direct: 0 dBm (0.6 V_p-p)

Offset: None

Harmonics

Normal: <40 dbc="" p="">

Direct: <49 dbc="" p="">

Normal: <46 dbc="" p="">

Direct: <55 dbc="" p="">

Nonharmonic Distortion

Clock: 1.2 GS/s, 14-bit operation

Frequency: 10 MHz to 480 MHz

Level: 4 dBm (1 V_p-p)

Offset: None

Clock: 0.6 GS/s, 14-bit operation

Frequency: 10 MHz to 240 MHz

Level: 4 dBm (1 V_p-p)

Offset: None

Spurious

< –60 dBc

Phase Noise

Clock: 1.2 GS/s, 14-bit operation

32-point waveform

37.5 MHz output

Amplitude: 10 dBm (2 V_p-p) at 0 offset, < –85 dBc/Hz at 10 kHz offset

Clock: 0.6 GS/s, 14-bit operation

32-point waveform

18.7 MHz output

Amplitude: 10 dBm (2 V_p-p) at 0 offset, < –85 dBc/Hz at 10 kHz offset

Jitter

Random jitter (typical)

1010 clock pattern

RMS value

Normal: 5.0 ps

Total jitter (typical)

2¹⁵ – 1 data pattern (at 10^–12 BER)

Peak-Peak value

Normal: 150 ps at 0.5 Gb/s

Characteristic

AWG5014C

AWG5012C

AWG5002C

Number of Outputs

4 channels

2 channels

Output connector

Differential, BNC (front panel)

Output impedance

50 Ω

Waveform Length

Standard – to 16M points

Extended memory – to 32M points

Number of Waveforms

1 to 16,200

Sequence Length/Counter

1 to 8,000 steps

1 to 65,536 count

Run Modes

Continuous

Waveform is iteratively output. If a sequence is defined, the sequence order and repeat functions are applied

Triggered

Waveform is output only once when an internal, external, programmatic (GPIB, LAN), or manual trigger is received

Gated

Waveform begins output when gate is "True" and resets when gate is "False"

Sequence

Waveform is output as defined by the sequence selected

Jump

Synchronous and asynchronous

Sampling Clock

Resolution

8 digits

Accuracy

Within ±(1 ppm + Aging)

Aging: Within ±1 ppm per year

Internal Trigger Generator

Range

1.0 µs to 10.0 s

Resolution

3 digits, 0.1 µs minimum

Output Skew Control

Range

–5 ns to 5 ns

Resolution

5 ps

Characteristic

AWG5014C

AWG5012C

AWG5002C

Operating System / Peripherals / IO

Windows 7

4 GB memory CD/DVD drive (front panel)

300 GB Solid State Drive (std) / 1 TB Mechanical Hard Disk Drive (opt) (rear-panel removable, optional front mount kit)

USB compact keyboard and mouse

USB 2.0 compliant ports (6 total – 2 front, 4 rear)

PS/2 mouse and keyboard connections (rear panel)

RJ-45 Ethernet connector (rear panel) supports 10/100/1000BASE-T

eSATA (rear panel)

DVI/I Video (rear panel)

Display Characteristics

LED backlit monitor with touch screen, 10.4 in. (264 mm) 1024 × 768 (V) XGA

Waveform File Import Capability

Import waveform format by series:

*.AWG file created by Tektronix AWG5000 or AWG7000 Series

*.PAT, *.SEQ, *.WFM, and *.EQU file formats created by Tektronix arbitrary waveform generators such as the AWG400/500/600/700 Series

*.TIQ and *.IQT files created by Tektronix real-time spectrum analyzers

*.TFW file created by Tektronix AFG3000 Series arbitrary/function generators

*.DTG file created by Tektronix DTG5000 Series data timing generators

*.WFM or *.ISF file created by Tektronix TDS/DPO Series oscilloscopes text file (*.TXT)

Waveform File Export Capability

Export waveform format by series:

Tektronix AWG400/500/600/700 (*.wfm or *.pat) and text format

Software Driver for Third-party Applications

IVI-COM driver, MATLAB library

Instrument Control / Data Transfer

GPIB

Remote control and data transfer (conforms to IEEE-Std 488.1, compatible with IEEE-Std 488.2 and SCPI-1999.0)

Ethernet

Remote control and data transfer (conforms to IEEE-Std 802.3)

TekLink

Remote control and data transfer (proprietary bus for Tektronix product high-speed interconnection and communication)

LAN eXtensions for Instrumentation (LXI)

Class LXI Class C

Version 1.3

Characteristic

AWG5014C

AWG5012C

AWG5002C

Markers

Number

Total: 8 (2 per channel)

Total: 4 (2 per channel)

Style

Single ended

Connector

BNC (front panel)

Impedance

50 Ω

Level (into 50 Ω)

Amplitude levels are measured between differential outputs (+) to (–)

Single-ended output amplitude level will be one-half the voltage levels below

Window

–2.0 V to 5.4 V

Amplitude

0.2 V_p-p to 7.4 V_p-p

Resolution

10 mV

Accuracy

±(10% of setting + 120 mV)

Rise/Fall time (20% to 80%)

300 ps (1.0 V_p-p, Hi: 1.0 V, Lo: 0.0 V)

Timing skew

Range

0 to 1000 ps

Resolution

50 ps

Delay control

Range

0 to 300 ps

Resolution

1 ps

Accuracy

±(5% of setting + 50 ps)

Jitter

Random RMS (typical)

5 ps

Total p-p (typical)

80 ps (2¹⁵ – 1 PN pattern at 10^–12 BER)

10 MHz Reference Out

Amplitude

1.2 V_p-p into 50 Ω, maximum 2.5 V open

Connector

BNC (rear panel)

Impedance

50 Ω, AC coupled

Clock Out (VCO)

Range

600 MHz, 1.2 GHz

Amplitude

0.4 V_p-p into 50 Ω to ground

Connector

BNC (rear panel)

Impedance

50 Ω, AC coupled

DC Outputs

Number

4, independently controlled

Range

–3.0 V to 5.0 V

Resolution

10 mV

Accuracy

±(3% of setting + 120 mV)

Connector

2×4 pin header (front panel)

Current (max)

±100 mA

Characteristic

AWG5014C

AWG5012C

AWG5002C

Trigger / Gate In

Polarity

Pos or Neg

Range

50 Ω: ±5 V

1 kΩ: ±10 V

Jitter (typical)

2.0 ns to 4.5 ns

Connector

BNC (front panel)

Impedance

50 Ω, 1 kΩ

Threshold

Level

–5.0 V to 5.0 V

Resolution

0.1 V

Trigger to output uncertainty

Asynchronous (typical)

Between internal/external clock and trigger timing: 2.0 ns to 4.5 ns

Trigger mode

Minimum pulse width

20 ns

Trigger hold-off

160 × sampling period – 200 ns

Delay to output

48 × sampling period + 500 ns

Gated mode

Minimum pulse width

1024 × sampling period + 10 ns

Delay to output

240 × sampling period + 500 ns

Event In

Polarity

Pos or Neg

Range

50 Ω: ±5 V

1 kΩ: ±10 V

Connector

BNC (front panel)

Impedance

50 Ω, 1 kΩ

Threshold

Level

–5.0 V to 5.0 V

Resolution

0.1 V

Sequence mode

Minimum pulse width

20 ns

Event hold-off

200 × sampling period + 500 ns

Delay to output

260 × sampling period + 300 ns (Jump timing: asynchronous jump)

External Clock In

Input voltage range

0.2 V_p-p to 0.8 V_p-p, –10 dBm to 2 dBm

Frequency range

600 MHz to 1.2 GHz (acceptable frequency drift of ±5%)

Clock divider

1/1, 1/2, 1/4...1/256

Connector

BNC (rear panel)

Impedance

50 Ω, AC coupled

Fixed Reference Clock In

Input voltage range

0.2 V_p-p to 3.0 V_p-p, –10 dBm to 14 dBm

Frequency range

10 MHz, 20 MHz, 100 MHz (within ±0.1%)

Connector

BNC (rear panel)

Impedance

50 Ω, AC coupled

Phase Lock In

Input voltage range

0.2 V_p-p to 3.0 V_p-p, –10 dBm to 14 dBm

Frequency range

5 MHz to 600 MHz (acceptable frequency drift is ±0.1%)

Multiplier rate

1 to 240

Connector

BNC (rear panel)

Impedance

50 Ω, AC coupled

Add In

Input voltage range

±1.0 V

DC gain

Bandwidth

DC to 100 MHz (–3 dB)

Connector

BNC (rear panel)

Impedance

50 Ω, AC coupled

Dimension

in.

Height

245

9.6

Width

465

Depth

500

19.7

Weight

lb.

Net (instrument)

19.5

Net (with packaging)

28.5

62.8

Mechanical Cooling

Clearance

in.

Top/Bottom

0.8

Side

Rear

7.5

Power Supply

Rating

100 to 240 V AC, 47 to 63 Hz

Consumption

450 Watts

Characteristic

Description

Temperature

Operational

10 to 40 °C

Nonoperational

20 to 60 °C

Humidity

Operational

5% to 80% relative humidity (% RH) at up to 30 °C, 5% to 45% relative humidity above 30 °C up to 50 °C

Nonoperational

5% to 90% relative humidity (% RH) at up to 30 °C, 5% to 45% relative humidity above 30 °C up to 50 °C

Altitude

Operational

Up to 10,000 ft. (3,048 m)

Nonoperational

Up to 40,000 ft. (12,192 m)

Vibration

Sine

Operational

0.33 mm p-p (0.013 in p-p) constant displacement, 5 to 55 Hz

Nonoperational

N/A

Random

Operational

0.27 g RMS, 5 to 500 Hz, 10 minutes per axis

Nonoperational

2.28 g RMS, 5 to 500 Hz, 10 minutes per axis

Mechanical Shock

Operational

Half-sine mechanical shocks, 30 g peak, 11 ms duration, 3 drops in each direction of each axis

Nonoperational

Half-sine mechanical shocks, 10 g peak, 11 ms duration, 3 drops in each direction of each axis

Regulatory

Safety

UL61010-1, CAN/CSA-22.2, No.61010-1-04, EN61010-1, IEC61010-1

Emissions

EN55011 (Class A), IEC61000-3-2, IEC61000-3-3

Immunity

IEC61326, IEC61000-4-2/3/4/5/6/8/11

Regional certifications

TEKTRONIX AWG5002C 임의 함수 발생기

Characteristics

AWG5000C Series Specifications

AWG5000C Series Common Features

관련 상품

관련 상품

Characteristic	AWG5014C	AWG5002C
Harmonic Distortion	Clock: 1.2 GS/s, 14-bit operation 32-point waveform 37.5 MHz output Normal: 10 dBm (2.0 V_p-p) Direct: 0 dBm (0.6 V_p-p) Offset: None	Clock: 0.6 GS/s, 14-bit operation 32-point waveform 18.7 MHz output Normal: 10 dBm (2.0 V_p-p) Direct: 0 dBm (0.6 V_p-p) Offset: None
Harmonics	Normal: <40 dbc="" p=""> Direct: <49 dbc="" p="">	Normal: <46 dbc="" p=""> Direct: <55 dbc="" p="">
Nonharmonic Distortion	Clock: 1.2 GS/s, 14-bit operation Frequency: 10 MHz to 480 MHz Level: 4 dBm (1 V_p-p) Offset: None	Clock: 0.6 GS/s, 14-bit operation Frequency: 10 MHz to 240 MHz Level: 4 dBm (1 V_p-p) Offset: None
Spurious	< –60 dBc
Phase Noise	Clock: 1.2 GS/s, 14-bit operation 32-point waveform 37.5 MHz output Amplitude: 10 dBm (2 V_p-p) at 0 offset, < –85 dBc/Hz at 10 kHz offset	Clock: 0.6 GS/s, 14-bit operation 32-point waveform 18.7 MHz output Amplitude: 10 dBm (2 V_p-p) at 0 offset, < –85 dBc/Hz at 10 kHz offset
Jitter
Random jitter (typical)	1010 clock pattern
RMS value	Normal: 5.0 ps
Total jitter (typical)	2¹⁵ – 1 data pattern (at 10^–12 BER)
Peak-Peak value	Normal: 150 ps at 0.5 Gb/s

Characteristic	AWG5014C	AWG5012C	AWG5002C
Operating System / Peripherals / IO	Windows 7 4 GB memory CD/DVD drive (front panel) 300 GB Solid State Drive (std) / 1 TB Mechanical Hard Disk Drive (opt) (rear-panel removable, optional front mount kit) USB compact keyboard and mouse USB 2.0 compliant ports (6 total – 2 front, 4 rear) PS/2 mouse and keyboard connections (rear panel) RJ-45 Ethernet connector (rear panel) supports 10/100/1000BASE-T eSATA (rear panel) DVI/I Video (rear panel)
Display Characteristics	LED backlit monitor with touch screen, 10.4 in. (264 mm) 1024 × 768 (V) XGA
Waveform File Import Capability	Import waveform format by series: .AWG file created by Tektronix AWG5000 or AWG7000 Series .PAT, .SEQ, .WFM, and .EQU file formats created by Tektronix arbitrary waveform generators such as the AWG400/500/600/700 Series .TIQ and .IQT files created by Tektronix real-time spectrum analyzers .TFW file created by Tektronix AFG3000 Series arbitrary/function generators .DTG file created by Tektronix DTG5000 Series data timing generators .WFM or .ISF file created by Tektronix TDS/DPO Series oscilloscopes text file (.TXT)
Waveform File Export Capability	Export waveform format by series: Tektronix AWG400/500/600/700 (.wfm or .pat) and text format
Software Driver for Third-party Applications	IVI-COM driver, MATLAB library
Instrument Control / Data Transfer
GPIB	Remote control and data transfer (conforms to IEEE-Std 488.1, compatible with IEEE-Std 488.2 and SCPI-1999.0)
Ethernet	Remote control and data transfer (conforms to IEEE-Std 802.3)
TekLink	Remote control and data transfer (proprietary bus for Tektronix product high-speed interconnection and communication)
LAN eXtensions for Instrumentation (LXI)	Class LXI Class C Version 1.3