Terasic TR5 FPGA 개발 키트

1. FPGA Device
5SGXEA7N2F45C2N
    622K Logic Elements (LEs)
    57.16 Mbits Memory
    256 Variable-precision DSP Blocks
    512 18x18-bit Multipliers Blocks
    28 Fractional PLLs and 4DLLs
    ＊FPGAs with higher LEs are also available. Please contact Terasic sales team.
2. FPGA Configuration
    MAX II CPLD EPM2210 System Controller for Fast Passive Parallel (FPP x16) Configuration
    On-board USB-Blaster II for use with Quartus II Programmer
3. Memory
    128MB Flash with a 16-bit Data Bus
    2MB SSRAM (1M x 16)
4. DDR3 SO-DIMM Socket
    Up to 8GB Capacity
    Maximum Clock Rate at 933 MHz
5. On-board Clocks
    50 MHz Fixed Oscillator
    CDCM6208 Programmable PLL
    LMK04906B Programmable PLL
6. SMA Connectors
    SMA Connector Pair for Differential Clock Input and Output
7. Buttons, Switches and LEDs
    4 User-controllable LEDs
    4 Buttons for User-defined Inputs
    4 Slide Switches for User-defined Inputs
8. Mini PCI Express Gen 2x4 Connector
    Support PCI Express Gen2 x4 (5.0Gbps/lanes)
    High-speed Transceiver Channels up to 5 Gbps
    Support Downstream Mode
9. Two Serial ATA Ports
     SATA 3.0 Standard at 6Gbps Signaling Rate
10. Four FPGA Mezzanine Card (FMC) Connectors
    2 HPC (high-pin count) FMC connectors up to 172 x2  Single-end I/O, 2 LPC (low-pin count) FMC connectors up to 76 x2 Single-end I/O
    10 Transceiver Channels for each HPC FMC connector and 1Transceiver Channel for LPC each HPC FMC connector
    FMC VITA 57.1 Compliant
    Adjustable VADJ : 1.2V/1.5V/1.8V/2.5V/3.0V.
11. One 40-pin Expansion Header
        36 FPGA I/O pins; 4 power and ground lines
        I/O standards: 3.3V
12. Power
    DC 12V Input
13. Kit contents
    TR5 FPGA Development Kit
    Type A to Mini-B USB Cable
    Fan (Installed)
    2GB DDR3-1600 SO-DIMM Module (Installed)
    12V DC Power Supply
    AC Power Cord
    FMC Loopback Card
    Screws, Copper Stands, and Silicon Footstands

Catalog