THORLABS LCM10 CO2 레이저 파이버 커터 (10,6 µm)

Laser Wavelength: 10.6 µm

Laser Output Power: 40 W (Max)

Power Stability: ±5%

Duty Cycle: 0 - 99%

Maximum Fiber Size: Ø1.5 mm

Supported Connector Types (One Mount for Each Included): FC/PC and SC. MT. SMA. LC

Included Cannula Stops:

- Ø1.25 mm Cannula Stop (For LC Connector Mount)

- Ø2.5 mm Cannula Stop (For FC/PC & SC Connector Mount)

Cut Time, Fiber Diameter ≤ 600 µm: <4 seconds

Cut Time, Fiber Diameter > 600 µm: <8 seconds

Fiber Protrusion Distance (Before Cutting): 1 - 50 mm

Minimum Cut Height, 1.25 mm Ferrule(a): 60 - 90 µm

Minimum Cut Height, 2.5 mm Ferrule(a): 80 - 120 µm

Minimum Cut Height, 3.2 mm Ferrule(a): 120 - 160 µm

Cut Height Repeatability: ±10 µm

Power Input: 90 - 264 VAC, 47 - 63 Hz. 8.2 A @ 115 VAC, 3.9 A @ 230 VAC

Operating Temperature: 15 to 40 °C

Storage Temperature: -20 to 60 °C

Operating Humidity: 0 to 75% Relative Humidity (Non-Condensing)

Storage Humidity: 0 to 90% Relative Humidity (Non-Condensing)

Altitude Range: 0 to 2000 m Above Sea Level

Dimensions (L x W x H) 23.11" x 18.25" x 9.95" (586.9 mm x 463.6 mm x 252.7 mm)

Weight: 46.8 lbs (21 kg)

Packaged Weight: 64.8 lbs (29 kg)

(a) There is a range of minimum cut heights since the beam is conical, and the angle of the cone and the diameter of the ferrule determine how close the fiber can be cut

MANUAL: