For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0

Tips for Using a Clamp Meter to Check Household Electrical Loads During Tet

2026년 02월 10일 09시 50분 52초

As Tet gets closer, more electrical appliances in the house tend to be used at the same time. The kitchen is almost always lit up, with induction cookers, electric hot pots, and kettles taking turns running from morning until night. In the living room, decorative lights are added, the TV stays on for hours, and some households even turn on speakers to make the atmosphere livelier. All of these are familiar everyday items, but when they are concentrated into just a few busy days, the home electrical system has to operate very differently from normal.

Many families only pay attention when the power goes down, the electrical outlets get hotter than usual, or the circuit breaker trips in the middle of cooking. Before that, everything was running smoothly, so very few people think about checking the electrical load in their home.

Why do families usually use more electricity during Tet than usual?

Normally, electrical appliances are used sporadically according to daily routines. Cooking meals is done on schedule, the TV is turned on for a short while in the evening, then turned off. During Tet Holiday, the rhythm of life changes completely. Cooking takes longer, sometimes with multiple dishes prepared simultaneously. Newly purchased appliances are often plugged in immediately, sometimes even sharing outlets for convenience.

Besides the kitchen, other areas of the house also consume more electricity. Decorative lights are left on all night, and air conditioners run continuously because there are more people in the house. The total electricity consumption doesn't increase from a single appliance, but gradually increases from many small habits combined, causing the electrical system to bear a heavy load in a short period.

Could the circuit breaker tripping repeatedly during Tet be due to a newly purchased appliance?

Many people experience the problem of the circuit breaker tripping only during lunchtime cooking or in the evening when the whole family is busy. If this only happens at certain familiar times, it's likely due to usage patterns rather than a faulty new appliance.

New appliances usually have higher power ratings than older ones, but this only becomes a problem when sharing an outlet or power line with many other devices. They work fine individually, but overload occurs when multiple devices are used simultaneously. In this case, replacing the circuit breaker with a higher-powered one might not solve the problem, as the root cause remains improper power distribution.

What can a clamp meter be used to test when dealing with a lot of electrical equipment?

A clamp meter is perfect for quickly checking your home's electrical usage during the Lunar New Year holiday without having to unplug sockets or deeply interfere with the system. Simply clamp it to the power supply for each branch, and you can immediately see which branch is handling the most appliances.

The key to using a clamp meter lies in observing the changes. For example, what was the current level in the stove branch before turning on the air fryer, and how much did it increase after it was turned on? How did the current decrease when some appliances were switched off? Comparing the before and after results helps quickly understand which appliances are putting the most strain on the system.

EMIN distributes clamp meters from brands like Hioki, Kyoritsu, Extech and Fluke, all capable of measuring AC current stably, making them suitable for household electrical testing. Their compact design and simple operation make them easy to use and familiar, even for non-professionals.

How should household electrical appliances be distributed sensibly during the Tet holiday?

In reality, simply adjusting your electrical habits can significantly reduce the number of tripped circuit breakers. High-power appliances like electric stoves, fryers, and microwaves should be used sparingly with extension cords. If possible, separate them into different outlets or use them alternately, avoiding turning them on simultaneously.

The living room is also a common area for overload during Tet Holiday. TVs, speakers, decorative lights, and phone chargers are often plugged into the same outlet for convenience. When tested with an ammeter, many families realize that this branch consumes significantly more electricity than they initially thought.

Small changes like turning off unnecessary appliances, spacing out usage times, and rearranging power outlets efficiently often yield more noticeable results than buying new ones. When the electrical system is used properly, Tet holiday activities become easier, and there's no need to worry about power outages while the whole family is gathered together.

관련 뉴스

Challenges of Pressure Gauges in Hydrogen Environments
2026년 10월 12일 16시 47분 15초

The global energy transition trend is driving industrial plants, chemical facilities, and renewable energy sites to integrate hydrogen as a strategic fuel source to achieve decarbonization goals. However, practical experience shows that traditional mechanical pressure gauges rapidly degrade in service life and experience dangerous failures when in direct contact with hydrogen environments.

The Trend of Eliminating Mechanical Pressure Gauges in Semiconductor Fabrication Plants
2026년 10월 12일 14시 44분 38초

In semiconductor cleanrooms, a single microscopic dust particle or a tiny toxic gas leak is enough to ruin an entire wafer batch worth millions of dollars. This vital requirement is accelerating a complete transition from traditional mechanical pressure gauges to digital pressure sensors and electronic pressure gauges.

NH3 and H2S Monitoring in Building Garbage Rooms: Sensor Selection, Placement, and Threshold Settings
2026년 10월 12일 14시 33분 46초

The waste storage chamber in a high-rise building is an enclosed space where the continuous decomposition of organic matter generates ammonia (NH3) and hydrogen sulfide (H2S)—often accompanied by methane and various odor-causing compounds. These gases pose a direct health risk to sanitation staff, spread odors into the building's general ventilation system, and corrode electrical cabinets, piping, and technical equipment. This article addresses the questions frequently raised by building managers, M&E engineers, and occupational safety personnel

Unlocking the Hidden Technology in Bosch Laser Distance Meters
2026년 10월 12일 11시 11분 31초

The Bosch GLM laser distance meter series has long been a staple on construction sites and in manufacturing workshops. Mastering these hidden features optimizes construction schedules and significantly reduces manual operational errors.

How Is Power-Rail Impedance Measured With a 2-Port Probe?
2026년 10월 12일 10시 07분 51초

A 2-port probe can measure PCB power-rail impedance with minimal board changes. For the VDD_3V3_S0 example, ON-state impedance was checked against an approximately 8 mΩ target through 7 kHz.

혜택 소식 받아보기

대량 할인, 도매 가격 업데이트 및 신제품 소식을 이메일로 받아보세요.

구독하면 당사의 서비스 이용약관 및 개인정보 처리방침에 동의하는 것으로 간주됩니다.

빠른 지원

인증된 전문가에게 직접 연결