빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
1.Base materials
Corrosion aluminum foil
Width: 50～320mm
Thickness: 15～50um
Areal density: 27～135g/m2
Copper foil
Width: 550～320mm
Thickness: 6～20um
Areal density: 53～178g/m2
2.Coating methods
1)Comma roll + microgravure coating
2)Comma roll: Continuous & Intermittent, microgravure: Continuous, can be set on the touch screen
3.Baking
1) oven length: 4000mm, 2000mm / section
2) airflow radiation belts and rollers
3) electric heating
4.Machine speed: Max7.5m/min
5.Coating speed: 1～7.5m/min(related to fluid state and the coating thickness )
6.Coating process parameters
1) continuous coating, the coating can be fixed length
2) Min interval length: 5mm
3) Max interval length: 250mm
4) Head and tail thickness control: By controlling the specific point in time to achieve and rubber tire wheel base ratio
7.Coating Precision: ±1.5% (related to the fluid state)
8.Tension range: 15 ~ 50N
9.Rollers width: 350mm
10.Roller diameter: General, 50mm,
11.Wind mouth Width: 350mm
12. NMP recovery system: Optional
13.Matching demand
1) Power distribution: AC220V, 50 / 60HZ, Max20KW, grounding resistance ≤10Ω
2) Machine size: Machine size:L x W x H = 3.5*1.2*1.5M
3) Compressed air: Maximum pressure not less than 0.5MPa
4) Exhaust emissions
Reserve at least 400 * 400mm
Or 400mm diameter exhaust outlet four
