빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Specifications:
1, Find conductors inside the wall, detect conductor interruptions or short circuits.
2, Trace the underground cable paths.
3, Locate fuses and devices associated with the fuses.
4, Identify short circuits and open circuits in the underfloor metal heating.
5, Trace metal water pipes and metal heating pipelines.
6, Adjustable sensitivity automatically/manually (Receiver: 3 levels; Transmitter: 9 levels)
Transmitter
Output signal: 33kHz
Energized wire voltage range : AC/DC 8~480V; AC: 50/60Hz/ 2.5% ±3deg
Screen: Segment code LCD (TN; Translucent )
Backlight: Yes
Code value: 0, 1, 2, 3, 4, 5, 6, 7
Signal strength: three level: 1, 2, 3
Unipolar test: √ (energized wire test, max voltage 480V)
Bipolar test: √ (energized wire test, max voltage 480V)
ELV LED indicator:
1. If the input voltage exceeds 25V, the ELV LED turns on.
2. As the voltage rises, the brightness of the ELV LED increases.
3. In any other case, the ELV LED will be dim or not illuminated.
Receiver:
Receiving frequency: 33KHz
Tracing depth:
Around 0~2.5m (unipolar mode; single-circuit: 2.5m)
Around 0~0.5m (bipolar mode)
NCV voltage range: 80V ~ 1000V, 50Hz/60Hz
Voltage detection depth: Around 0~0.4 m
Code value: 0, 1, 2, 3, 4, 5, 6, 7
Signal strength: three level: 1, 2, 3
Multi-Transmitors compatible: up to 8pcs
Screen: Segment code LCD (TN; Translucent )
Others:
Flash light: Yes
Backlight: Yes
Manual sensitivity adjustment: Yes
Over voltage category: CAT III 480V
Pollution rating: 2
IP rating: IP54
