UNI-T UTS3032T+ 스펙트럼 분석기 (9 kHz-3.2 GHz)

Frequency range : 9 kHz-3.2 GHz 

Frequency resolution :  1Hz

Sweep range : 0Hz,100Hz - 3.2 GHz 

Sweep accuracy : Swept ±[0.25%*Span+Span/(Points-1) ]; FFT ±[0.10%*Span+Span/(Points-1) ]

Sweep time : 1 ms to 4000 s(span≠ 0); 1 μs to 4000 s(span= 0)

Sweep mode : Swept,FFT

Marker mode : Normal, Delta Δ, Fixed

Marker function : Marker Noise, Band Power, Band Density, NdB, Counter

RBW (-3 dB) : 1 Hz-1 MHz,1-3-10 steps 

Video bandwidth (VBW):  1 Hz-1 MHz,1-3-10 steps 

Selectivity (–60 dB/–3 dB) : <4.8:1 (nominal)(-60dB:-3dB) 

Bandwidth accuracy (–3dB) : < 5% (nominal) 

Reference level : -100 dBm - +30 dBm,Steps 1 dB 

Preamp : 20 dB,Nominal 

Input attenuator range: 0-51 dB,1 dB Steps 

Maximum input DC voltage : 50 V DC max 

Maximum continuous wave RF power: ≤+33 dBm 3 minute,Input attenuation >20 dB 

Display log scale: 1 dB to 200 dB 

Display linear scale: 0 -Reference level 

Scale units : dBm,dBmV,dBuV,V,W 

Sweep (trace) point range : 10001

Number of traces : 4

Detection mode : Sample,Peak,Negative,Normal,Average S

Trace Type : Clear/Write,Average,Max Hold,Min Hold

Frequency response: 

Preamp Off : 9 kHz to 3.2 GHz:±0.6 dB;±0.3 dB,Typical 

Preamp On : 100 kHz to 3.2 GHz:±1.0 dB ; ±0.8 dB ,Typical 

Tracking generator: 

Frequency range: 10MHz-3.2 GHz 

Output level range: -40 dBm-0 dBm 

Resolution : 0.5 dB 

Flatness output : ±3 dB 

Interface : RF input,Trace source output,10MHz reference input, 10MHz reference output,Ext Trigger,HDMI,USB host, USB device,LAN,Headphone Jack

General Characterisitics: 

Power : 100-240V AC, 50Hz/60Hz; 100 to 120 VAC (Fluctuations±10%),400 Hz

Display : 10.1 'TFT LCD (1280x800) touch

Product size(W×H×D) : 378 mm×218 mm×120 mm

Product net weight : 4.55kg

Datasheet