Voltech DC1000A Bias Current Source

DC Bias: Current Output Current 0 to 25 Amps DC in 10 mA steps.

  Current when stacked 250 Amps DC with 10 x DC1000A

DC Bias: Current Output Accuracy of DC Current ±0.5% of reading ±25 mA.

  Compliance voltage 5 Volts

  Effect on the LCR measurement Typically <10uA per Volt, for 20 Hz-10 MHz LCR conditions. See User Manual for full error specification

Environmental Specifications : Temperature +5°to + 40°C operating

  Humidity : 10% to 80% RH non-condensing

  Power Supply to Case : 2.9 kV DC for 1 minute

  Power Requirement : 100-125 V / 200-250 V AC 48-65 Hz. 400 VA Max.

                          Fuse : 3.15 AT

Mechanical : H x W x L 88 mm x 475 mm x 255 mm

  Weight : 10 kg

  Mounting : Bench or 19" Rack mounting

Interfaces : RS232 Remote control

  Safety Interlock : Connection to operator safety system if required. Override plug Supplied.

Protection : Open circuit : Warning LED.

  Over temperature : Auto-Shutdown and warning

  Back -EMF (over voltage) : protects DC1000A and LCR meter

  Variable Speed Cooling Fan