Wavecontrol SMP2 (WSN0002) 전자기장 측정기 (1 Hz - 40 GHz,FFT)

Versions: Broadband, Selective and Dual
Field probes: Automatic detection and recognition
Broadband: 1 Hz - 40 GHz (option depending on field probe)
Spectrum analysis: 1 Hz - 400 kHz (FFT) (only for probe WP400 hoặc WP400 -3)
Weighted Peak Method: 1 Hz - 400 kHz (Real time WPM for direct comparision with limits) 
Readout values: Total field (instantaneous, max., min. and average)
Field components (X,Y,Z)
E Field units: V/m, kV/m, uW/cm2, mW/cm2, W/m2, %
H Field units: nT, uT, mT, T, A/m, %, mG
Log time: Configurable (from 0.5s to 6min)
Average modes: Sliding window, arithmetic and normative averaging according to
international standards
Average intervals: 10s, 15s, 30s, 1min, 2min, 5min, 6min, 10min, 15min, 30min
Schedule measurement: customized (up to 24 hours)
Memory capacity: More than 1 million samples
Data downloading: Mini-USB and Fibre Optics
Firmware updating: Mini-USB
Alarm: 2400 Hz audible signal (adjustable threshold)
Dislay type: Color transmissive TFT (480 x 272 pixels)
GPS (optional): Built-in u-blox 7 (56 independent tracking channels)
Battery: Internal rechargeable Li-on
Autonomy: >14 hours (with broadband probes)
>6 hours (with selective probes)
Temperature range: -10C to +50C
Size: 100 x 215 x 40 mm
Weight: 575g
Included: PC software (windows 7 or later), SMP2 2-probe carrying case, USB cable, DC
charger
Optional: Non-reflective wooden tripod, Internal embedded GPS, Fiber optics interface,
Vehicle DC chager, SMP2 3-probes carrying case, SMP2 protective pouch

Datasheet

Manual

Option:

WSNA0001    Tripod: non-reflective wooden tripod (including transport cover)
WSNA0002    Tripod – extension: horizontal extension arm for E  measurement
WSNO0001    GPS: internal embedded GPS
WSNA0004    Fiber: fiber optics I/O port. Including USB connector to PC
WSNA0007    Vehicle DC: charge SMP2 from a vehicle DC connector
WSNA0006    3 probes case: SMP2 carrying case to fit up to 3 probes
WSNA0005    Protection: SMP2 protective pouch

Option Probe: Khách hàng có thể lựa chọn cùng lúc nhiều đầu đo cho nhiều mục đích khác nhau

1. WP50 Field Probe:
+ 10 Hz - 3 kHz, E & H field, 
+ E field: 2.5 V/m - 20000 V/m (RMS)
+ H field: 0.25 µT - 2000 µT (RMS)
2.  WP400 Field Probe:
+ 1 Hz - 400 kHz, E & H field, Selective (FFT) & Broadband
+ Electric Field: 1 V/m to 100 kV/m
+ Magnetic Field: 50 nT - 10 mT (100 Hz - 10 kHz)
3.  WP400-3 Field Probe
+ 1 Hz - 400 kHz, E & H field, Selective (FFT) & Broadband
+ Electric Field: 10 V/m to 400 kV/m
+ Magnetic Field: 200 nT - 50 mT (100 Hz - 10 kHz)
4.WPF3 Field Probe:
+ 100 kHz - 3 GHz, E field, Broadband
+ 0.2 - 130 V/m (CW)
5.  WPF3-HP Field Probe:
+ 100 kHz - 3 GHz, E field, Broadband
+ 0.2 – 1000 V/m (CW)
6. WPF6 Field Probe:
+ 100 kHz - 6 GHz, E field, Broadband
+ 0.3 - 130 V/m (CW)
7. WPF6-HP Field Probe:
+ 100 kHz - 6 GHz, E field, Broadband
+ 0.3 – 1000 V/m (CW)
8. WPF8 Field Probe:
+ 100 kHz - 8 GHz, E field, Broadband
+ 0.3 - 130 V/m (CW)
9. WPF8-HP Field Probe:
+ 100 kHz - 8 GHz, E field, Broadband
+ 0.3 – 1000 V/m (CW)
10. WPF18 Field Probe:
+ 300 kHz - 18 GHz,  E field,  Broadband
+  0.5 - 250 V/m (CW)
11. WPF18-HP Field Probe:
+ 300 kHz - 18 GHz,  E field,  Broadband
+  0.5 – 1000 V/m (CW)
12. WPF40 Field Probe:
+ 20 MHz - 40 GHz, E field, Broadband
+ 1 – 1000 V/m (CW)
13. WPH60 Field Probe:
+ 300 kHz - 60 MHz, H field, Broadband
+ 0.018 - 20 A/m (CW)
14 WPH1000 Field Probe:
+ 30 MHz - 1000 MHz, H field, Broadband
+ 0.020 - 20 A/m
15. WPT Field Probe:
+ Bands: 700-900, 1800-1900, 2100 and 2600, E field, Selective broadband
+ 0.04 – 65 V/m (RMS)
16. WP-WiFi Field Probe:
+ Band: 2400-2500, E field, Selective broadband
+ .04 – 65 V/m (RMS)