For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0

Why Do Two Barometers Show Different Readings ?

2026년 07월 20일 15시 17분 53초

Two barometers placed side by side can display different atmospheric pressure readings. Learn the technical reasons behind these differences and what they mean for measurement accuracy.

Atmospheric pressure measurements are influenced not only by environmental conditions but also by the sensor technology, signal-processing algorithms, temperature compensation, and the accuracy specifications of the Air pressure meter provided by the manufacturer.

Every Air Pressure Meter Samples Atmospheric Pressure Differently

Atmospheric pressure is constantly changing, even if the variation is only a fraction of a hectopascal from one second to the next. Some barometers update their readings continuously, while others calculate and display the average of multiple measurements.

As a result, instruments with different sampling intervals rarely produce identical readings, even when placed side by side.

The Same Measurement Range Does Not Mean the Same Accuracy

Two barometers may share the same measurement range of 300–1100 hPa, yet still report slightly different values. The specification that deserves closer attention is accuracy.

For example, one instrument may have an accuracy of ±0.3 hPa, while another is rated at ±1 hPa. A difference of 0.5 hPa between the two readings can still fall within the specified tolerance of both instruments.

For this reason, calibration laboratories compare each instrument with a certified reference standard instead of comparing one display directly with another.

Temperature and Installation Location Can Influence the Reading

Pressure sensors require time to reach thermal equilibrium after the instrument is powered on. Atmospheric pressure also decreases with altitude at a rate of approximately 1 hPa for every 8 meters under standard atmospheric conditions.

As a result, two barometers installed at different locations within the same building—or positioned near a heat source or an air-conditioning vent—may display slightly different readings.

Signal Processing Contributes to Reading Differences

The value displayed on the screen is not the raw output from the pressure sensor. It has already been processed by the instrument's firmware.

Some barometers are designed to respond quickly, causing the displayed value to change more frequently. Others apply digital filtering to minimize noise, resulting in a steadier display with a slight response delay.

Calibration Does Not Make Every Barometer Display the Same Value

Calibration is performed to determine an instrument's measurement error relative to a reference standard, not to force every instrument to display identical readings.

As long as the measured error remains within the specified tolerance and meets the required measurement uncertainty, the instrument is considered to perform correctly after calibration.

The Value of a Barometer Lies in Data Stability

In meteorological observation, environmental monitoring, and laboratory applications, the objective is not to make every instrument display the same number.

A barometer with excellent repeatability, low long-term drift, and well-controlled measurement error provides far more reliable data than one whose readings fluctuate constantly, even if its instantaneous values appear close to the reference.

When selecting a barometer, users should look beyond measurement range and resolution. Accuracy, temperature compensation, long-term stability, calibration interval, and repeatability are the specifications that determine the quality and reliability of atmospheric pressure measurements in meteorology, environmental monitoring, laboratories, and industrial applications.

관련 뉴스

Reduce scratches and drops of PCB boards during transfer between stages in an SMT production line
2026년 11월 16일 10시 42분 38초

In a well-functioning SMT line, when QC detects defects at the end of the process, the immediate assumption is often that the issue lies with the solder paste printer or the component placement machine. However, upon closer investigation, there are certain types of defects that cannot be attributed to any single specific stage. Read the article below to learn more!

Homes on busy streets: How to measure fine particulate matter and exhaust fumes entering your living room
2026년 11월 16일 09시 42분 31초

Living in a house facing a main road is particularly frustrating: you might wipe the tables until they’re spotless in the morning, only to find them covered in a layer of dust by the afternoon. Even with the doors tightly shut and the curtains drawn, the house still feels stuffy by evening—permeated by the faint, lingering presence of vehicle exhaust. While regular dust can be swept away, fine particulate matter the kind you can’t even see silently seeps in through the gaps around your doors and windows. So, before you rush to spend money on an air purifier or weather-stripping, take a moment to check the current air quality inside your home and identify exactly where the pollutants are entering

When Should You Use Stick, TIG, or MIG Welding?
2026년 11월 16일 08시 47분 55초

Stick welding uses a coated electrode without shielding gas; TIG prioritizes clean, precise welds; MIG supports continuous wire feeding and easier automation.

What Are 10 Common MIG Welding Problems and Fixes?
2026년 11월 16일 08시 47분 05초

Common MIG welding faults often trace to shielding gas, polarity, wire feeding, torch condition, joint preparation, welding settings, or cable connections. Match the symptom to its likely checks before changing parts.

What Safety Rules Apply When Using a Plasma Cutter?
2026년 11월 16일 08시 46분 16초

Safe plasma cutting depends on protection from heat, arc light, electrical hazards, fumes, and gas-system risks. Keep combustibles at least 10 m away and inspect cables, torch parts, grounding, PPE, and gas equipment before work.

혜택 소식 받아보기

대량 할인, 도매 가격 업데이트 및 신제품 소식을 이메일로 받아보세요.

구독하면 당사의 서비스 이용약관 및 개인정보 처리방침에 동의하는 것으로 간주됩니다.

빠른 지원

인증된 전문가에게 직접 연결