빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
For Protective Clothing:
Force measurement: 0-60000N
Frequency response range: 5-1000Hz
Lift device: Motorized system, have upper and lower limit
Dimension: 650mm×770mm×2200mm
Power Supply: AC 220V+/-10%, 50Hz
EN 1621-1:
Mass of striker: 5000+/-10g
Flat Striking Surface: 40mmx80mm
Round Edges of Striker: 5+/-0.5mm Radius
Impact energy: 50J+/-2J
Anvil Radius: 50mm
Total Height of Anvil: 180+/-20mm
EN 1621-2:
Bar Impactor Length: 160+/-2mm
Bar Impactor Width: 50+/-1mm
Bar Impactor Cylindrical Face Radius: 12.5+/-0.1mm
Mass of impactor and guided mass: 5000g+/-50g
Impact Energy: 50+/-1.5J
Anvil Height: 190+/-20mm
For Protective Gloves:
Mass of striker: 2.5kg
Impact energy: 5J
Flat face of striker: 80mm
Force measurement: Force measurement
Lift device: Motorized system, have upper and lower limit
Dimension: 650mm×770mm×2200mm
Power Supply: AC 220V+/-10%, 50Hz
Product Description:
Impact Protection Gloves :For gloves that are designed, constructed and claimed to provide specific impact attenuation, the materials shall not crack when a 2.5kg load with an impact energy of 5J drops on the tested material- peak transmitted shall also be <7 KN.
It is used for protective clothing impact test.
Adopt high precision piezoelectric ceramic force sensor, high resolution, fast reaction, good repeability, the machine controlled by computer, all test process is through computer controlled, automatic record impact force, automatic calculate average impact force, testing report also be available.
Test Standards: Standard: For Protective Clothing: EN 1621-1, EN 1621-2 For Protective Gloves: EN 13594, EN 388
