빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Water evaporation rate: Max. approx. 3,000 mL/h
Temperature control range: 40°C to 300°C
Blower/Dry air flow rate: Brushless motor/0.3 to 1m3/min
Spraying system: Two-way nozzle (Dia. of orifice: 0.7mm)
Spray/hot air contact system: Downward spray parallel flow system
Temperature display: Inlet temp. output temp. digital display (0~320°C)
Temperature sensor: K thermocouple
Stainless pipe heater: 2kW×2
Sample liquid feeding pump: Flow rate variable up to 70mL/min.
Solvent recovering capability (optional): Organic solvent recovery unit GAS410 must be used
Drying chamber: Ultrahard glass, I.D. 457×975(H)mm
Spray line cleaning: Needle inside the nozzle to clean the mesh automatically
Safety device: Inlet/Outlet temperature overheat, Sample feed reverse rotation mechanism, Overheat prevension of heater room, over current electric leakage breaker, Safety cover
Dry air flow meter: Float type, Measuring range:0.3~1.2m3/min
Air spray pressure gauge: Bourdon type, Measuring range:0~0.3MPa
External dimensions: W1060×D880×H1,750mm
Weight: Approx. 180kg
Power source: AC 220V, single phase 22A
Included Accessories:
Sample liquid tube: Silicone tube (I.D. 3.2mm ×O.D. 6.4mm ×2m), 2pcs
Static removal brush: 1pc
Air hose: I.D. 7.9 mm×3m, 1pc
Exhaust duct: I.D. 50mm×3m, 1pc
Optional Accessories
Spraying nozzle: 4, 5 (options), 3 standard
Compressed air: 28 L/min air volume and 3kgf/cm2 compressed air is required
