Condenser: Type B (vertical)
Configuration:
Glass condenser: Vertical double-wound coil (coolingsurface area: approx. 0.143mm², with heatinsulation) vacuum seal (FKM, single-sided PTFE finish)
Rotary joint: TS29/38 inner diameter ø18×L208mm
Standard flasks: Evaporative flask (TS29/38, 1L) and clip (POM), receiving flask (S35, 1L), and clamp (SUS)
Motor: DC brushless motor
Connection nozzle dia.: Outer diameter 10mm (cooling water/vacuum)
Performance:
Rotation speed range: 5 to 315rpm encoder type digital setting and display
Jack: Manual balance type (~200mm stepless adjustment, fixed/released by 90°Crotation)
Evaporation capacity: Approx. 23 mL/min (water evaporation)
Other features: Automatic reverse switching by forward/reverse/timer, Power failure recovery (mode selection type)
Standard:
Applicable distillation flask: $29 50 to 2000mL (JIS standard)
Applicable receiving flask: 100 to 2000mL
Power source (50/60Hz): AC100 to 230V Single phase, SE type (2P)/KC plug
Current: 1A
External dimensions (WxDxHmm): 529x324x745(jack maximum position: H945mm)
Weight: 9kg (Rotary evaporator body: approx. 7kg + glass set: approx. 2kg)
Water Bath:
Performance:
Temperature range: Room Temp. +10 to 90°C
Temp. adjustment accuracy: ±1.0°C
Configuration:
Exterior material: PBT (Glass fiber is entered)
Bath internal material: Stainless steel
Safety features: Automatic overheat prevention, Upper temperature limit abnormality, Independent overheat prevention (fixed temperature type), Power supply cut off by power supply fuse, Sensor disconnection detection
Other features: Calibration offset, overshoot notification, Power failure recovery function (mode selection type)
Standard:
Power source (50/60Hz): AC200 to 230V 5-6A Single phase
Bath internal dimensions and capacity: ø240×119mm/Approx. 5L
External dimensions: ø262 (Up to 286 mm in depth)x H 240mm
Weight: Approx.4.5kg
Accessories: Instruction manual, Warranty card, Power cord (approx. 3m), Fuse 15A (large), Fuse 2A (small)
인증된 전문가에게 직접 연결