Yamato WG252 Water Purifier (Ion-exchange + Distillation)

Water purifying method: Ion exchange → distillation → filtration

Sampled pure water method: Ion-exchanged water / distilled water

Distilled water production: About 1.5L / h

Amount of distilled water collected: ~ Approximately 2.5 L / min (with variable flow rate function) * 2

Ion-exchanged water sampling amount: Approximately 1.0 L / min (without variable flow rate function) * 2

Collection capacity setting range: 0.01 ~ Tank water storage L / Continuous water sampling * 3

Condenser: Hard glass

Heater: Ceramic heater 1.2kW

Pretreatment cartridge: 0.1 μm hollow fiber membrane + activated carbon (PWF-1)

Ion exchange resin cartridge: 1 CPC-S 4L type (cartridge with activated carbon)

Distilled water / ionized water final filtration: 0.1μｍ×2

leak detection: Forced shutoff of water supply solenoid valve by leak detection sensor at the time of leak

Distilled water storage tank: 30L polyethylene tank

Distilled water UV sterilization: Optional

Water sampling sink: Push-open type, load capacity: 10 kg, 5 L for beakers with hands

Multipurpose distilled water sampling port: For Φ8 hard tube connection (right side of the main body)

Standard raw water pressure range: 0.05～0.5 MPa

Standard Raw water requirement: Approx. 2.0 L/min

Standard ambient temperature range: 5～35 ℃

Function Distilled water tank water level display: 1L unit

Distilled water tank full water setting: 2，10，20，30L

Display / setting Water quality display: Conductivity / resistivity (switching)

Display / Settings Other displays: Notification: Consumables replacement / Periodic maintenance, Alarm: Water outage / Trend data recording impossible / Power failure / Distilled water quality deterioration, Abnormal: Controller / Water leakage / Heater overheating / disconnection / Tank water level gauge / Boiler water level, Water level gauge / Boiler drainage route / Cooling water / Water quality meter / Water sampling pump, / Ion exchanged water flow rate decrease / Water sampling route

Accessories: 1 water supply hose (2 m), 1 water supply hose filter, 1 connection hose assembly, 1 can stone cleaner, 1 pretreatment cartridge, 1 ion exchange resin cartridge, 1 air vent filter, 2 membrane filters , 2 filter covers, 2 magnet hooks, 1 copy of instruction manual (operation / structure), 1 warranty

External dimensions（W×D×H mm): 540×570×775mm

Power Source:

AC220V

Single phase with step-down transformer

Weight: 63kg