빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Pressure Measurement:
+ Measurement range: Positive pressure: 0 to 200 kPa, Negative pressure: -80 to 0 kPa
+ Measurement accuracy(6 months after calibration): Positive pressure 20 to 200 kPa: ±(0.01% of reading + 0.003 kPa) 0 to 20 kPa: ±0.005 kPa; Negative pressure: ±(0.2% of reading + 0.080 kPa)
+ Measurement accuracy (1 year after calibration): Positive pressure 20 to 200 kPa: ±(0.01% of reading + 0.010 kPa)0 to 20 kPa: ±0.012 kPa; Negative pressure: ±(0.2% of reading + 0.090 kPa)
DC Current Measurement: 20 mA, 100 mA; 0.015% of reading + 3 µA at 20 mA
DC Voltage Measurement: 5 V, 50 V; 0.015% of reading + 0.5 mV at 5V
DC Current Source: 20 mA, 20 mA SIMULATE; 0.015% of setting + 3 µA
DC Voltage Source: 5V; 0.015% of setting + 0.5 mV
Display: Dot matrix LCD (320x240 dots)
Backlight: LED
Display refresh rate: Approx. 300ms (3 times/sec)
Warm-up time: Approx. 5 minutes
Power supply: Six alkaline AA batteries
Battery life: Approx. 35 hours when measuring current with the 24 V loop power supply OFF and approx 10 hours with the 24 V loop power supply ON
Auto power-off: Approx. 60 minutes (the function can be disabled)
Insulation resistance: 100 MΩ or more (500 VDC) between the input terminal and case and between the input port and case
Withstand voltage: 500 VAC for 1 minute between the input terminal and case and between the input port and case
Dimensions: Approx. 264 (W) x 188 (H) x 96 (D) mm, excluding protrusions
Weight: Approx. 2kg (including batteries)
Operating temperature / humidity ranges: -10 to 50°C and 20 to 80%RH (no condensation)
Storage temperature / humidity ranges: -20 to 60°C and 20 to 80%RH (no condensation)
Accessories: A set of 1.7m long black and red lead wires with alligator clips for generation and measurement, six alkaline AA batteries, R1 1/4” – 1/8” NPT female thread x 1, ferrite core x 2, R 1/4” – 1/4” NPT female thread x 1, accessory case, instruction manual (CD), startup guide, shoulder strap
