TOA DKK WQC-30 핸드 헬드 멀티 파라미터 수질 측정기
생산업체: TOA DKK Model: WQC-30 출처: Japan 보증: 12 Month - 견적요구
- 연락처
-Parameter: pH, Conductivity, Turbidity, Temperature, Salinity, DO(optional)
-Measurement method:
+pH: Glass electrode method
+Temp.: Thermistor resistor method
+Turbidity: 90℃ light scattering method
+Conductivity: AC 4 electrode method
+Salinity: Conversion from Conductivity
+DO(optional): Membrane type polarographic method
-Measurement range:
+pH: pH0.00 ~ pH14.00
+Temp.: 0.0 ~ 50.0℃
+Turbidity:
0.0 ~ 80.0 NTU(mg/L)
0 ~ 800 NTU(mg/L)
Range switch::Automatic/Manual
+Conductivity: 0.0 mS/m ~ 10.00 S/m
Range switch::Automatic/Manual
+Salinity: 0.00~4.00% (NaCl) / 0.00~40.00(PSS)
+DO(optional): 0.00~20.00 mg/L / 0~200 %
-Display range:
+pH: pH-2.00 ~ pH16.00
+Temp.: -5.0 ~ 110.0℃
+Turbidity:
0.0 ~ 88.0 NTU(mg/L)
0 ~ 880 NTU(mg/L)
+Conductivity:
0.0 ~ 202.0 mS/m
0.000 ~ 2.020 S/m
0.00 ~ 20.20 S/m
+Salinity: 0.00~4.04% (NaCl) / 0.00~40.40(PSS)
+DO(optional): 0.00 ~ 22.00 mg/L / 0 ~ 220 %
-Repeatability:
+pH: Within ±0.05 pH
+Temp.: Within ±0.5℃
+Turbidity: Within ±1%(FS), Within±0.8NTU(0.0~80.0NTU), Within8NTU(0~800NTU)
+Conductivity: Within ± 1% (FS) each range
+Salinity: Within ± 0.04% (NaCl) / Within ± 0.42 (PSS)
+DO(optional): Within ±0.1 mg/L / ±2 %
-Sensor depth: Within 30m(0.3MPa equivalent)
-External output: RS-232C(Non-insulated):PC or external printer EPS-P30(optional)
-Water proof(Main unit): IP67(Effective when connected to sensor and when output/input part is masked)*1m、30min immersion possible
-Guaranteed temperature: 0~45℃(0~40℃ when using optional AC adapter or external printer)
-Power source: AA battery/Nickel hydrogen battery (2) or AC adapter (7VA optional)
-Dimensions: Main unit:Approx.68(W)×35(H)×173(D)mm Sensor module;Approx.φ55×476mm
-Weight: Main unit:Aprox.290g(Including batteries); Sensor module(Cable length 2m):Approx.1400g
-Inluding:
+ Main unit
+ Sensor: WMS-30
+ Standard solution pH 6.86 500mL: 143F192
+ Standard solution pH 4.01 500mL: 143F191
+ Reference sensor replaceable liquid junction part: 678458K
+ Reference sensor internal get liquid (50mL): 143F235
+ Special tool (spanner): 67628000
+ Calibration beaker: 7340450K (2pcs)
+ Silicon grease: 141D002
+ AA Battery (2pcs)
+ Dummy cap (built-in sensor mounting part): 7313440K
+ Manual
-Tính năng:
+ Đo đồng thời tối đa 6 chỉ tiêu
+ Có kết quả đo chính xác cao trong phép đo độ đục phạm vi nhỏ
+ Lưu trữ tới 200 điểm dữ liệu
+ Nhỏ gọn và chắc chắn
+ Khả năng mở rộng hệ thống (có thể kết nối với PC, máy in ngoài)
+ Hữu dụng khi đo chất lượng nước sông/hồ và nhà máy nước thải
Các hạng mục đo lường:
pH, độ đục, độ dẫn điện, độ mặn, nhiệt độ, DO (tùy chọn)
Ứng dụng: Dùng để độ pH, độ dẫn điện, độ đục, độ mặn, DO, nhiệt độ ở sông, hồ, đập, các nhà máy, công trình.
Datasheet
- 품질 보증
- 공인 보증
- 집으로 배달
- 간단하게 거래하기