Voltage Input Module for Remote I/O NI REM-11100 (4-Channel, ±10 V, 16 bits)
Hãng sản xuất: NI Model: REM-11100 P/N: 784748-01 - Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222) 730.39.68
TP. Hải Phòng: (0225) 730.03.89
TP. HCM: (028) 38.119.636
Đồng Nai: 0345.689.536
Number of inputs: 4
Input signal: 0 V to 5 V, -5 V to 5 V, 0 V to 10 V, -10 V to 10 V
Resolution A/D: 16-bit
Conversion time A/D: 31.25 μs
Limit frequency (3 dB): 30 Hz , 12 kHz
Measured value representation: 16 bits (15 bits + sign bit)
Process data update: 160 μs
Input filter: 30 Hz, 12 kHz and mean-value generation
Precision: 0.1%
Transient protection of inputs: Suppressor diode
Input resistance: 268 kΩ, typical
Provides voltage input channels for remote I/O systems. Remote I/O modules must be used with a supported NI real-time controller.
The Voltage Input Module for Remote I/O features 2-, 3-, and 4-wire spring terminal connection methods, a built-in power supply for sensors, four selectable input ranges, and simultaneous sampling. A remote I/O system consists of an EtherCAT bus coupler and individual modules mounted on a DIN rail. You control the Voltage Input Module for Remote I/O from a real-time controller, such as a CompactRIO Controller or an Industrial Controller. You can use remote I/O hardware to add low-cost I/O for simple tasks while your controller handles advanced tasks such as image processing, motion control, and high-speed or specialty measurements.
Datasheet
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch
