Thiết bị kiểm tra điện áp, kẹp dòng điện Chauvin Arnoux C.A 757
Hãng sản xuất: Chauvin Arnoux Model: C.A 757 P/N: P01191757 Xuất xứ: China (Trung Quốc) - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222) 730.39.68
TP. Hải Phòng: (0225) 730.03.89
TP. HCM: (028) 38.119.636
Đồng Nai: 0345.689.536
- Kiểm tra dòng
+Dải đo với cảm biến dòng: 500 mA đến 300 A (2 thang)
+Độ phân giải: 0.01 A đến 0.1 A
- Điện áp DC
+Dải đo: 3 mV đến 1,000 V – 4 thang
+Độ phân giải: 1mV đến 1 V
- Điện áp AC
+Dải đo: 100 mV đến 1,000 V – 4 thang
+Độ phân giải: 1 mV đến 1 V
- Tần số hoạt động: DC và 50/60 Hz
- Trở kháng: 10 MΩ
- Phát hiện điện áp không tiếp xúc: Với 230V 50/60Hz từ khoảng cách gần 5cm
- Âm báo kiểm tra thông mạch: R ≤ 30 Ω
- Kiểm tra điện trở
+Dải đo: 0.3 Ω đến 30 MΩ – 6 thang
+Độ phân giải: 0.1 Ω đến 0.01 MΩ
- Kiểm tra điện dung
+Dải đo: 400 pF đến 30 mF
+Độ phân giải: 0.001 nF đến 0.01 mF
- Tiêu chuẩn: 600 V CAT III, IEC 61010-1, IEC 61010-031, IEC 61010-032, IEC 61010-033
- Nguồn cấp: 2 x 1.5 V LR03 batteries
- Thời gian hoạt đông: 100 giờ với pin kiềm - chế độ chờ tự động sau 10 phút
- Kích thước/ trọng lượng: 180 x 52 x 45 mm / 200 g
Bộ thiết bị tiêu chuẩn: Túi đựng mềm, 1 bọ que đo đen/ đỏ CAT III/CAT IV (red/black), pin 2 x 1.5 V AAA / LR3 ,1 cảm biến MiniFlex® có chiều dài vòng lặp 250 mm, 1 dây nối 1 m long và 1 bộ kết nối dành cho C.A 757, 1 hộp Velcro
Phụ kiện & linh kiện thay thế:
- 1 bộ que đo đen/đỏ CAT III/IV P01102152Z
- 1 bộ que đo đen/đỏ Ø 2 mm CAT II P01102153Z
- 1 bộ que đo đen/đỏ Ø 4 mm CAT II P01102154Z
- Phích chuyển đổi C.A 753 2 cực + tiếp đất (2P + E) P01191748Z
- Dây đeo Velcro x 5 P01102113
- Pin 1.5 V LR3/AAA (x 1) P01296032
- Túi đựng tương thích phụ kiện MultiFix 120 x 200 x 60 P01298074
- Phụ kiện gá đỡ MultiFix P01102100Z
- Cảm biến dòng MA101-250 cho C.A 757 P01120591
datasheet
user guider
catalog vietnamese
catalog english
Advantages
- Automatic recognition of AC and DC
- Automatic recognition of resistors, diodes and capacitors
- Automatic calibre selection
- Hazardous voltage indication
- Removable test probes
Description
The compact, lightweight C.A 757 tester is a test and measurement instrument offering all the essential functions required by electricians on a day-to-day basis.
The compact C.A 757 fits comfortably in one hand and is equipped with an IP 54 casing protected against dust and water projections which also withstands fall from up to 2 metres. Its large backlit display makes it easy to read the values. The test probes are removable and easy to replace. They are stowed with their cable in a built-in compartment on the instrument.
Ergonomic and quick to prove essential for test and maintenance work, the C.A 757 also ensures that you work in total safety:
- protection against electric shocks up to 6 kV for voltage measurements
- protection up to 1,000 V for all the functions
- indication when a hazardous voltage is present
- automatic power-off after 10 minutes.
With its 600 V CAT III double insulation, the C.A 757 complies with the new IEC 61010-2-033 standard for multimeters.
Simple to use, the C.A 757 automatically recognizes Ac and DC voltages, as well as continuity, resistors, diodes and capacitors. It also detects live conductors without contact.
Lastly, the C.A 757 is delivered with a MiniFlex flexible current sensor allowing current measurements up to 300 AAC even in places where access is difficult.
Main specifications:
• DC voltage: 3 mVDC to 1000 VDC
• AC voltage: 100 mVAC to 1000 VAC
• Currents: 500 mA to 300 A (with MiniFlex sensor supplied)
• Resistance: 0.3 Ω to 30 MΩ
• Audible continuity for R ≤ 30 Ω
• Capacitance: 400 pF to 30 mF
• Diode test
• No-contact voltage detection
• 600 V CAT III
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch