Máy đo độ dày ăn mòn Elcometer CG70BDL (B-scan, đo qua lớp sơn)
Hãng sản xuất: ELCOMETER Model: CG70BDL - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222) 730.39.68
TP. Hải Phòng: (0225) 730.03.89
TP. HCM: (028) 38.119.636
Đồng Nai: 0345.689.536
Chế độ đo: PE, EE
Tốc độ đo:
+ Bằng tay: 4 giá trị đọc mỗi giây
+ Chế độ scan: 32 giá trị đọc mỗi giây
+ Hiển thị thanh scan: 6 giá trị đọc mỗi giây
Thang đo:
+ PE: 0.63 - 254mm
+ EE: 1.27 - 102mm
Độ chính xác: ± 1% hoặc ±0.1mm
Độ phân giải: 0.01 mm
Dải hiệu chuẩn tốc độ: 1250 - 9,999m/s
Tốc độ hiển thị B-Scan: 15 giây mỗi màn
Ghi dữ liệu: 12000 giá trị đọc
Kiểu đầu dò: Dual element
Dải tần số đầu dò: 1 - 10MHz
Màn hình: 1/8 inch VGA
Đơn vị đo: mm hoặc inch
Kiểu pin: 3 pin kiềm AA
Thời lượng pin: 200 giờ
Nhiệt độ hoạt động: -10 đến 60ºC
Kích thước (w x h x d): 63.5 x 165.0 x 31.5mm
Trọng lượng: 383 g
Giao tiếp RS232
Danh sách đóng gói: Máy chính, chất tiếp âm, hộp cứng, hướng dẫn sử dụng, chứng nhận kiểm tra, 3 pin AA, phần mề, cáp truyền dẫn
Lưu ý: Máy chưa bao gồm đầu dò, chọn đầu dò tham khảo Datasheet Transducer
CG70 Corrosion Thickness Gauges
The CG70 range of corrosion thickness gauges with its large, easy to read display, provides users with A and B-Scan options for accurate interpretation of measurements.
The Elcometer CG70 corrosion thickness gauge is available in two models: CG70BDL and CG70ABDL. Both models offer 2D cross sectional block view, providing a graphical representation of a materials thickness, ideal for accurate analysis and identification of pits and corroded areas.
Features:
|
Model & Part Number |
CG70BDL |
CG70ABDL |
Material thickness digits display |
■ |
■ |
B-Scan cross sectional display |
■ |
■ |
Combined B-Scan and digits display |
■ |
■ |
Scan bar display |
■ |
■ |
A-Scan display |
|
+ Rectified, - Rectified, Full Waveform (RF) |
Measurement Mode |
PE & EE (ThruPaint™) |
PE & EE (ThruPaint™) |
Measurement Rate |
|
|
Measuring Range1 |
PE: 0.63 - 254mm (0.025 - 9.999 inches) |
PE: 0.63 - 254mm (0.025 - 9.999 inches) |
Measurement Accuracy1 |
± 1% or ±0.1mm whichever is the greater |
± 1% or ±0.1mm whichever is the greater |
Measurement Resolution |
0.01mm (0.001 inches) |
0.01mm (0.001 inches) |
Velocity Calibration Range |
1250 - 9,999m/s (0.0492 - 0.3937in/μs) |
1250 - 10,000m/s (0.0492 - 0.3936in/µs) |
High speed scan mode |
■ |
■ |
Differential mode |
■ |
■ |
Limit alarm mode |
■ |
■ |
B-Scan display speed |
15 seconds per screen |
15 seconds per screen |
Flaw mode |
|
Basic prove-up flaw detection using |
Calibration setups |
6 factory & 64 user-definable setups |
6 factory & 64 user-definable setups |
Gates |
|
• PE: 1 gate; EE: 2 gates, 1 gate with hold off |
Pulser type |
Square wave pulser |
Square wave pulser with adjustable |
Gain |
PE: selectable low, medium or high gain |
Manual or automatic gain control (AGC) with |
Timing |
20MHz with ultra low power 8 bit digitizer |
20MHz with ultra low power 8 bit digitizer |
Data logging |
• 12,000 readings with waveform |
• 12,000 readings with waveform |
Calibration Options |
Single, two point, velocity & material type |
Single, two point, velocity & material type |
Transducer Probe Type |
Dual element |
Dual element |
Transducer Frequency Range |
1 - 10MHz |
1 - 10MHz |
Transducer recognition |
Manual - selectable from a list |
Manual - selectable from a list |
V-path / dual path error correction |
Automatic |
Automatic |
Probe zero |
Manual (via integrated probe disk) |
Manual (via integrated probe disk) |
Display |
1/8" VGA (greyscale) |
1/8" VGA (greyscale) |
Units (selectable) |
mm or inches |
<p align="center" style="margin-bottom:0in;margin-bottom:.0001pt; text-align:center;line-height:n |
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch