快速支持
直接联系认证专家
Power Source: 12V Power adapter
Static Power Consumption: 30W
Max Power Consumption: 75W
Hardware Interface: USB 3.0
Timing Analysis (Asynchronous，Max. Sample Rate): 4GHz
State Clock Rate (Synchronous，External Clock): 400MHz
Storage: Conventional Timing, Transitional Timing
Channels: 136
Total Memory: 32Gb
Timing Analysis: Available Chs (Conventional / Transitional Timing) - Memory per Ch
4GHz Timing [Available Chs] - Memory per Ch: [16 / 16]-2Gb
2GHz Timing [Available Chs] - Memory per Ch: [32 / 32]-1Gb
1GHz Timing [Available Chs] - Memory per Ch: [64 / 64]-500Mb
500MHz Timing [Available Chs] - Memory per Ch: [128 / 128]-250Mb
250MHz Timing [Available Chs] - Memory per Ch: [128 / 128]-250Mb
Channel to channel skew: 250 ps
Input channels: N/A
Input impedance: ~ 55KΩ || <2pF to 1Vdc
Max. (Non-destructive): ±40V
Input operation: ±15V
Input sensitivity: ~300mV
Threshold group: N/A
Threshold range: ±15V
Threshold resolution: 10mV
Threshold accuracy: ±100mV + 5%* Vth
Trigger resolution: 250 ps
Trigger types: Channel, Pattern, Single / Multi Level, Parallel Clause, Width, Time-out, External
Protocol Trigger:
BiSS-C, CAN2.0B/CAN FD, DALI, DP_Aux, eMMC 4.5, eSPI, HID over I2C, I2C, I2S, LIN2.2, LPC, MDIO, MII, Mini/Micro LED, MIPI I3C 1.1, MIPI RFFE 3, MIPI SPMI 2, Modbus, NAND Flash, PMBus, Profibus, PWM, RGMII, RMII, SD 3.0 (SDIO 2.0), SENT, Serial Flash (SPI NAND), SMBus, SPI, SVI2, SVID, UART (RS232), USB PD 3, USB1.1
Protocol Analyzer:
BiSS-C, CAN2.0B/CAN FD, DALI, DP_Aux, eSPI, HID over I2C, I2C, I2S, LIN2.2, MDIO, MII, MIPI I3C 1.1, MIPI RFFE 3, Modbus, PMBus, Profibus, PWM, RGMII, RMII, SMBus, SPI, SVID, UART (RS232), USB PD 3, USB1.1
