快速支持
直接联系认证专家
Range Measuring range Resolution Measuring current Accuracy
100mΩ 0.00mΩ～150.00mΩ 10μΩ 100mA within ±0.05% of rdg ±3digit
1000mΩ 0.0mΩ～1500.0mΩ 100μΩ 10mA within ±0.05% of rdg ±3digit
10Ω 0.000Ω～ 15.000Ω 1mΩ 10mA within ±0.025％ of rdg ±3digit
100Ω 0.00Ω～ 150.00Ω 10mΩ 5mA within ±0.025％ of rdg ±3digit
1kΩ 0.0Ω～ 1500.0Ω 100mΩ 5mA within ±0.025％ of rdg ±3digit
10kΩ 0.000kΩ～ 15.000kΩ １Ω 500μA within ±0.025％ of rdg ±3digit
100kΩ 0.00kΩ～ 150.00kΩ 10Ω 50μA within ±0.025％ of rdg ±3digit
1000kΩ 0.0kΩ～ 1500.0kΩ 100Ω 5μA within ±0.025％ of rdg ±3digit
10MΩ 0.000MΩ～15.000MΩ 1kΩ 0.5μA within ±0.05% of rdg ±3digit
％ 5mΩ～10MΩ±50.0％ 0.1％ [5μΩ] Refer to the above within ±0.2％±1digit
Open-circuit voltage of measuring terminal: 100ｍΩ～100Ω range：less than 5V
1kΩ～10MΩ range：less than 15V
Measuring method: 4-terminal measurement (Contact check available)
Sampling time: [Free running mode] 5 times per second～10 times/sec.
[Remote start mode] about 15msec.～30msec.
Comparator set range: [Ω measurement] 4½ digit, both HI and LO (15000)
[％ measurement] 50.0％ (LO：0～－50.0％, HI：0～＋50.0％)
Indication of comparator's comparison result: LED indication LO/GO/HI and buzzer
Control signal: Input：Remote start input
Remote hold input
Output：comparison signal (LO/GO/HI)
contact error signal (CE)
completion of the measurement signal (EOC)
Operation condition [Temp.]: ＋5℃～＋40℃ [Humidity] less than 85%
Power supply: AC100V～240V selectable, 50/60Hz, about 30VA
Outer dimension: about 260 (W) ×90 (H) ×250 (D) mm (excluding protruding parts such as rubber legs, etc.)
Weight: about 2.6kg
