Resolution: 0.01Mpa (1psi)
Display panel: capacitive touch screen
Power supply: Built-in replaceable rechargeable battery
Host dimension: L280 x W90 x H165mm
Three-point dimension: L148 x W148 x H238mm
Net wight: 10kg
Accuracy: ±1% of full scale
Built-in multiple dollies for selection: 40 x 40mm, 50 x 50mm, 45 x 95mm, 100 x 100mm
Unit: Mpa, psi
Pulling rate: 0.2-0.4Mpa/s, depending on dolly
Charging adapter: DC12.6V, power: 65W
Introduction
BEVS 2209 Automatic Bond Strength Tester is used to test the bond strength of materials, such as exterior wall facing tiles, mosaics, exterior wall insulation materials, various boards, paints and other materials bonded to the wall or the ground, concrete etc. The instrument is a small automatic hydraulic force measuring device. When testing the bonding strength, the pull-off test is automatically performed on the surface through the three-point stand.
Features
Large touch screen operation
Built-in rechargeable battery
Automatic test
Maximum pulling force can be set
Test force value and holding time can be set
Automatically stop when the set force is reached
Strength up to 10Mpa for dolly/test block 50 x 50mm
Can set a fixed pulling rate
Adjust the pulling angle through the foot screw
Data save and quick view
USB transfer data
4 different sizes of test block/dolly for selection
Real-time display of measurement data and curve
Real-time display of pulling rate
Real-time display of environment temperature and humidity
Auto reset when test done
Order Info
BEVS 2209 Automatic Bond Strength Tester
Datasheet
直接联系认证专家