Chemtrol CH240 消毒剂和pH控制 (200~995 mV, 0.1~10 ppm (mg/l), 7.0~8.0pH)

PPM Sensor: Solid State with Selective Membrane and 10 ft. sensor cable

ORP Sensor: Platinum electrode with 10-ft (3 m) cable

pH Senso: Glass electrode with 10-ft (3 m) cable

PPM Control: Standard from 0.1 to 10 ppm (mg/l) / Optional from 0.01 to 2.00 ppm (mg/l)

ORP Control: Adjustable from 200 to 995 mV

pH Control: Adjustable from 7.0 to 8.0

Readouts: PPM or ORP (3 digits) and pH (2 digits) LEDs

Feed Modes: Manual, automatic, proportional

Adjustments: Setpoint, calibration, limits, feed rate

Indicators: LEDs for feed mode, feed status, alarms

Safety: Audio, visual and remote alarms, Out-of-range limits and overfeed safety timers

Cabinet: Polystyrene 9x7x4 in. (22x18x10 cm)

Plumbing: PVC tees for 1-1/2” or 2” line

Electrical: 110V, 230V or 24 VAC (specify)

Manual

Brochure