Cosmopia ER-165HTP Walk-In Type Temperature Chamber (－30 ~ 80℃; 16.2 m²)

Walk-in type temperature and humidity chambers: Water-cooling

Temperature range: -30 ~ 80 °C

JTM K07

Temperature/humidity fluctuation: ±0.3 °C

Temperature/humidity gradient: ±2.5 °C

Spatial temperature/humidity deviation: ±2.0 °C

Temperature change rate (Rise): 2°C/min. (-19 ~ 69°C)

Temperature change rate (Drop): 1.2°C/min. (69 ~ -19°C)

Time to reach extreme temperatures (Rise): Within 70 min. (20 ~ 80°C)

Time to reach extreme temperatures (Drop): Within 110 min. (20 ~ -30°C)

Testing room floor space: 16.2 m²

External dimensions (W x D x H): 4500 x 3600 x 2325 mm

Internal dimensions (W x D x H): 4350 x 3450 x 2100 mm

Exterior/interior materials: Color steel plate (ivory) / stainless steel plate

Floor load capacity: 5.9 kN/m²

Door (width x height): 830 x 1,800 single opening, 1 location

Observation window (W x H): 190 x 320 door area, 1 location

Inner light (60 W capacity): 3 Qty.

Cable hole: ø50, 1 location (with rubber plug)

Temperature (humidity) control unit: EU-65HT × 2

Defrosting method: Off－cycle defrosting (refrigerator operation stopped, room temperature 5 to 40℃), temperature－increase defrosting (room temperature －10 to 5℃)

Power supply: Three-phase 200V 50/60Hz

Maximum load current: 45× 2 A

ELB capacity: 75× 2 A

Coolant

Water volume: 2400× 2 L/h

Water pressure: 0.1 to 0.5 MPa

Water temperature: 18 to 32 °C

Piping dimensions inlet/outlet: Rc1× 2 / Rc1× 2

Datasheet