Cosmopia ES-207LHH Air Flow Type Thermal Shock Testing Apparatus (150℃/20 min; −75℃/45 min; 200L)

Type: Stationary sample type, cool/hot air switchable, two/three zone switchable

Temperature setting range:

Testing temperature: Low-temperature testing: −70 to 0℃, High-temperature testing: 60 to 200℃

Precooling temperature: −80℃ to testing chamber temperature low-temperature setting

Preheating temperature: Testing chamber temperature high-temperature setting to 210℃

Temperature fluctuation margin: ±0.5℃

Temperature rise time (high-temp chamber): Room temperature to 150℃: Within 20 min.

Temperature drop time (low-temp chamber): Room temperature to −75℃: Within 45 min.

Temperature cycle performance:

Temperature return time: Within 3 min.

Return time guaranteed cycles: 5 cycles (low-temperature start)

Sample Type: Plastic molded IC

Sample Weight: 10 kg (IC 5.5 kg + single-stage jig 4.5 kg)

Testing chamber temperature/time (Low): －55℃/30 min.

Testing chamber temperature/time (High): 125℃/30 min.

Temperature measurement position: Upwind side

Continuous operation cycles: 100 cycles (low-temperature start)

Testing chamber volume: 200 L

Permissible sample weight inside testing chamber: Max. 50 kg (Bottom 40 kg or less, sample shelf 12 kg or less [per shelf])

Testing chamber dimensions (W×D×H): 630 × 690 × 460 mm

Product dimensions (W×D×H): 1,535 × 1,450 × 1,980 mm

System component materials: Exterior: Stainless steel (SUS430), Interior: Stainless steel (SUS304)

Cooling method: Dual refrigeration using mechanical compressor (water-cooling)

Cooling system refrigerant/output:

High-temperature side: R404/7.4 kW (inverter control)

Low-temperature side: R23/4.5 kW (inverter control)

Operational noise: 65 dB(A)

Power supply: Three-phase 200V 50/60Hz, Three-phase 220V 60Hz, Three-phase 380V 50Hz

Maximum load current / Power supply capacity: 120 A / 42 kVA

Dry air: Pressure: 0.4 to 0.7 MPa, Consumption: Approx. 10.2 L(ANR) per cycle

Coolant:

Water volume: 4200 L/h (coolant inlet temperature 32℃)

Water pressure: 0.1 to 0.5 MPa

System side piping diameter: Rc 1 1/4

Drain piping: Rc 1/2

Product weight: 1120 kg

Datasheet