For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0
Product image

Doble-Megger DLRO10 Digital Microhmmeter (1.9999 mΩ~1999.9 Ω)

联系我们
安全结算
品质保证
轻松更换与退货
支持配送

Resistance ranges

Full Scale: 1.9999 mΩ~1999.9 Ω

Resolution: 0.1 μΩ~100 mΩ

Measurement mode: Manual, Auto, Continuous, Inductive

Measurement control: Fully Automatic

Measurement speed: <3s for forward and reverse current and to display average

Display Measurement: 4 1/2 digit seven segment LED

Range and safety: DLRO10 LED indications

Test method: Single cycle reversing DC ratiometric measurement - average result display.

Test current accuracy: ±10%

Test current stability: <10 ppm per second

Lead resistance: Maximum 100 mΩ total for 10 A operation irrespective of battery condition.

Voltmeter input impedance: >200 kΩ

Noise rejection: Less than 1% ±20 digits additional error with 100 mV peak 50/60 Hz. on the potential leads.

Warning will show if hum or noise exceeds this level.

Battery type: 5.2 lithium ion rechargeable

Battery life: Typical 1300 x 10 A tests before recharge

Battery charge time : Via external 90 V – 260 V 50/60 Hz charger from 12 to 15 V DC supply

Standard: 2.5 hours to 90% capacity, 4 hours to fully charged

Slow Charge: +10 °C to + 45 °C (50 °F to 113 °F)

Operating temperature range and humidity:

+5 °C to +45 °C (41 °F to 113 °F) at full accuracy

-10 °C to +50 °C (14 °F to 122 °F) at reduced accuracy

<90% RH @ 40 °C (104 °F) non-condensing

Storage temperature range and humidity

-30 °C to +70 °C (50 °F to 113 °F)

<90% RH @ 40 °C (104 °F) non-condensing

Temperature co-efficient: <0.01% per °C, over range 5 °C to 40 °C (<0.0006% per °F from 41 °F to 104 °F)

Maximum altitude: 2000m (6562 ft) to full safety specifications

Datasheet

获取优惠更新

获取专属批量折扣、批发价格更新和新产品通知,直接发送到您的邮箱。

订阅即表示您同意我们的服务条款和隐私政策。

快速支持

直接联系认证专家