Dwyer 32A030 紧凑型1/32 DIN温度/过程控制器，双显示和通用输入

Weight: 4 oz

Accuracy: ± 0.25% span ± 1 least significant digit

Compliance: CE, UL

Input Type: Thermocouple, RTD, DC Voltage or DC Current

Output Note: Relay: SPST, 3A @ 240 VAC resistive; 1.5A @ 240 VAC inductive; Pilot duty rating: 250 VA, 2A @ 120 VAC or 1A @ 240 VAC.

Switch Type: SPST

Display Note: Two 4-digit, 7 segment, 0.259 high (6.35 mm) LEDs

Display Type: LED

Memory Backup: Non-Volatile

Switch Rating: 3 A @ 240 Vac, 1.5 A @ 240 Vac

Control Output: Relay, Alarm

Supply Voltage: 100 to 240 Vac/132 to 240 Vdc

Output Type (A): Relay

Output Type (B): N/A

RTD Input Range: JPt 100: -4 to 752°F; Pt 100: -328 to 1562°F; Ni 120: -112 to 572 °F; Cu 50: -58 to 302 °F

Number of Digits: 4

Enclosure Ratings: IP66, NEMA Type 4X

Power Consumption: max 5 VA

Supply Power Note: 100 to 240 VAC, nominal, +10 - 15%, 50 to 400 Hz. single phase; 132 to 240 VDC, nominal, +10 - 20%

Supply Power Type: AC/DC

Voltage Input Range: 0 to 5 V, 0 to 10 V

Input Control Signal: 0 to 20 mA

Mounting Orientation: 1/32 DIN

Temperature Sensor Type: RTD or Thermocouple

Operating Temperature, Max: 131 °F

Operating Temperature, Min: 14 °F

Thermocouple Input Range Note: Type K: -328 to 2372°F; Type J: -148 to 2192°F; Type T: -328 to 752°F; Type E: 32 to 1112°F; Type W: -328 to 2372°F; Type R: 32 to 3092°F; Type S: 32 to 3092°F; Type B: 212 to 3272°F; Type L: -328 to 1562°F; Type U: -328 to 932°F

Datasheet