Eijkelkamp 06.01.SB 手持式贯入仪 (0~10000 kPa, 3m)

Applications

Geotechnical soil research 

Trafficability or load bearing capacity research (e.g., construction sites) 

Checking artificial compaction of the soil 

Research the growing conditions of plants in the soil 

Tracing compacted layers in the soil (plow sole)  

Specifications

Angle of cone: 60°

Cone surface range: 1, 2, 3.3, 5 cm²

Connection: Screw thread

Maximum force: 10000 @ 1 cm² kPa

Measured parameters: Penetration resistance

Measuring accuracy: < +/- 8%

Measuring range: 0...10000 kPa

Product material: Stainless steel, iron, other material

Reading accuracy: 1%

Registration type: Manual

Description

With the hand penetrometer you can easily and quickly measure the resistance of the ground using your own body weight. Simply push the hand penetrometer evenly into the soil to take the measurement. The resistance measured at the cone can be read from the pressure gauge, which indicates it with a red pointer. 

The actual resistance to penetration (kPa/cm²) of the soil can be determined by dividing the reading value by the surface of the cone. The size of the to be used cone is depends on the hardness of the soil: the harder the soil, the smaller the cone. However, the larger the cone, the more accurate the measurement will be. The hand penetrometer is suitable for several applications.

Available variations

06.01.SA Range 1 metres

06.01.SB Range 3 metres

Set contains

Measuring device 

2 sets of probe rods 

4 types of cones; 1, 2 3 1/3 & 5 cm², angle 60° 

Inspection jig for cones 

Maintenance kit 

Transport case 

Manual