For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0
Product image

Eijkelkamp 08.02.SA pF测定用砂/高岭土箱 (2.0 - 2.7 pF)

联系我们
安全结算
品质保证
轻松更换与退货
支持配送

Applications

Soil physical laboratory research

pF determination in the lab

Irrigation research

The sandbox and the sand/kaolin box can be used together to cover a larger pF-range (0 - 2.7). A filled box will last several years, if it is inundated with water after each test. A copper ring prevents algal growth in the instrument.

Specifications

Maximum number of samples: 40

Measuring range: 2.0 - 2.7 pF

Reading accuracy: 0.01 bar

Sample specification: undisturbed

Sample stored in: ring

Measured parameters: pF

Voltage: 110 - 240 volt

Power supply: line voltage

Package size: 145 x 62 x 52 cm

Weight: 108 kg

Description

When researching the quantity of moisture available in the soil for plants and trees to grow, it's essential to determine the moisture characteristic (or pF-curve). The sand/kaolin box is suitable for a maximum of 40 soil sample rings and uses undisturbed samples of 53 or 60 mm in diameter.

The standard set for pF determinations of pF 2.0 - 2.7 (0.1 - 1 bar) contains:

Sand/kaolin box with control panel

Electronical suction level control system (pressure range 0 - 600 hPa)

Pressure sensor

10 litre tank

Containers with synthetic sand

Container with kaolin clay

Various accessories

Method

The test is done on undisturbed soil samples, which can be taken with a soil sample ring kit (07.53.SC).

Firstly, the samples are fully saturated and subsequently weighed with respect to the increasing values of the moisture tension. These moisture tensions are obtained by creating a series of under- and overpressure. Weighing of the samples after each adjustment yields the moisture content for each moisture tension.

Additional requirements

Correct use of this instrument also requires a soil sample ring kit, cases with soil sample rings and aluminium soil sample boxes. A balance and a drying oven are part of the minimum equipment for preparation of the samples. The laboratory table on which the measuring instrument is placed should be level and isolated against vibration.

Manual


获取优惠更新

获取专属批量折扣、批发价格更新和新产品通知,直接发送到您的邮箱。

订阅即表示您同意我们的服务条款隐私政策

快速支持

直接联系认证专家