Elcometer A456CFBI1 涂层测厚仪（0-1500μm，黑色金属） | EMIN.VN

Elcometer A456CFBI1 涂层测厚仪（0-1500μm，黑色金属）

Name: Elcometer A456CFBI1 涂层测厚仪（0-1500μm，黑色金属）
Brand: ELCOMETER
Price: 23437000 VND
Availability: OutOfStock

制造商ELCOMETER

ModelA456CFBI1

原产地United Kingdom

不含增值税

23,437,000 VND

含增值税

25,311,960 VND

数量

安全结算

品质保证

轻松更换与退货

支持配送

Range: 0-1500μm
Resolution: 0.1μm: 0-100μm; 1μm: 100-1500μm
Accuracy: ±1-3% or ±2.5μm
Ferrous Integral
Calibration memory type; gauge (g) or gauge & batch (gb): g
Gauge memory: last 5
Data output: USB; to computer
Tough, impact, water & dust resistant; equivalent to IP64
Display information: 2.4 inch (6cm) QVGA colour TFT display, 320 x 240 pixels
Battery type: 2 x AA dry cell batteries, rechargeable batteries can also be used
Battery life: ~24 hours of continuous use at 1 reading per second5
Gauge dimensions (h x w x d): 141 x 73 x 37mm
Gauge weight: 161g including supplied batteries
Operating temperature: -10 to 50°C
Packing list: Elcometer 456 gauge, calibration foils (integrals only), protective case, 2 x AA batteries, operating instructions

Manual

Datasheet

The Elcometer 456 Coating Thickness Gauge sets new standards; providing reliable and accurate coating thickness measurements; helping you to become more efficient.

The Elcometer 456 dry film thickness gauge is available in three different models. Each coating thickness gauge provides the user with increasing functionality - from the entry level Elcometer 456 Model B, to the top of the range Elcometer 456 Model T.

Integral coating thickness gauges are ideal for single handed operation as the wide footprint of the Bigfoot™ internal probe provides greater stability during coating thickness measurement - allowing for consistent, repeatable and accurate dry film thickness results.

Elcometer 456 Coating Thickness Gauge

Technical Specification

Integral Model Options
Scale 1	Range: 0-1500μm (0-60mils)	Accuracy*: ±1-3% or ±2.5μm (±0.1mil)
	Resolution: 0.1μm: 0-100μm; 1μm: 100-1500μm (0.01mil: 0-5mils; 0.1mil: 5-60mils)
	Model B	Model S	Model T	C
Elcometer 456 Ferrous Integral	A456CFBI1	A456CFSI1	A456CFTI1	●
Elcometer 456 Non-Ferrous Integral	A456CNBI1	See separate gauges with N2 PINIP™ Probe	See separate gauges with N2 PINIP™ Probe	●
Elcometer 456 Dual FNF Integral	A456CFNFBI1	A456CFNFSI1	A456CFNFTI1	●

Scale 2	Range: 0-5mm (0-200mils)	Accuracy*: ±1-3% or ±20μm (±1.0mil)
	Resolution: 1μm: 0-1mm; 10μm: 1-5mm (0.1mil: 0-50mils; 1mil: 50-200mils)
For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance
	Model B	Model S	Model T	C
Elcometer 456 Ferrous Integral	A456CFBI2	See separate gauges with F2 PINIP™ Probe	See separate gauges with F2 PINIP™ Probe	●

Scale 3	Range: 0-13mm (0-500mils)	Accuracy*: ±1-3% or ±50μm (±2.0mils)
	Resolution: 1μm: 0-2mm; 10μm: 2-13mm (0.1mil: 0-100mils; 1mil: 100-500mils)
	Model B	Model S	Model T	C
Elcometer 456 Ferrous Integral	A456CFBI3	See separate gauges with F3 PINIP™ Probe	See separate gauges with F3 PINIP™ Probe	●

Separate Model Options
</sp