Tough, impact, waterproof and dust resistant equivalent to IP54
Measurement Mode: Echo-Echo (E-E), Interface Echo (I-E), Plastic Mode (PLAS)
Measurement Rate: 4, 8, 16Hz
Thickness Range:  E-E 0.15 - 10.15mm, I-E 1.65 - 25.40mm, PLAS 0.15 - 5.00mm 
Measurement Accuracy: E-E 0.15 - 10.15mm, I-E 1.65 - 25.40mm, PLAS 0.15 - 5.00mm 
Measurement Units: mm or inches
Selectable Reading Resolution
+ Lo; ie 0.1mm, 0.01 Inch, 10m/s, or 0.001 in/μs
+ Hi; i.e. 0.01mm, 0.001 Inch, 1m/s, or 0.0001 in/μs
Calibration Options: 1 - point, 2 - point, Material selection; 39 preset materials, Factory; resets to the factory calibration, Velocity (speed of sound)
Data Output: USB; to PC, ElcoMaster® software
Battery Type: 2 x AA
Battery Life: Alkaline: 15 hours
Lithium: 28 hours
Operating Temperature: -10 to 50°C (14 to 122°F)
Size (w x h x d): 145x73x37mm (5.7x2.84x1.46")
Weight (including batteries): 210g (7.4oz)
Packing List: Elcometer PTG6, 15MHz 1/4 inch Microdot right angle single element transducer, couplant, wrist harness, 3 x screen protector, protective case, plastic transit case, 2 x AA batteries, calibration certificate, two year warranty extension card, operating instructions

Note: A transducer is not suppied with the Gauges, must be ordered separately

Manual

Datasheet

Datasheet Transducer

PTG6 Precision Thickness Gauge

When precision is key, the PTG6 has a measurement range of 0.15mm  to 25.40mm with ±1% accuracy, across three measurement modes, Interface Echo (I-E), Echo-Echo (E-E), and Plastic Mode (PLAS). This gauge allows users to take measurements with pinpoint accuracy.

Calibration Options

The PTG6 has a number of calibration options. Using an uncoated sample of test material of a known thickness, the gauge can be calibrated using 1-Point calibration. Alternatively, the user can select one of 39 pre-set materials stored within the gauge including; aluminium, steel, stainless steel, cast iron, plexiglass, PVC, polystyrene and polyurethane.

The PTG6 also offers the additional calibration options of 2-Point & Velocity.

Data Output

Compatible with ElcoMaster^® software, individual readings can be downloaded via USB to PC or similar device for further analysis.

Features: Interface Echo (I-E) Echo-Echo (E-E) ) & Plastic Mode (PLAS) measurement modes Measurement range from 0.15mm  to 25.40mm 2-Point, 1-Point, Material, Thickness Set and Factory Calibration options User selectable measurement rate; 4,8,16 readings per second User selectable reading resolution; 0.1mm  or 0.01mm USB output to ElcoMaster®

Technical Specification

STANDARDS:

EN14127, EN15317

¹ Supplied with 15MHz 1/4"Microdot right angle single element transducer

² Internet connection required

³ The Elcometer MTG range is extendable within 60 days from date of purchase, free of charge to two years

⁴ User selectable default setting in scan mode is 16 Hz

⁵ Dependent on the material being measured and the transducer being used

⁶ Whichever is the greater

⁷ Supplied with Alkaline, Lithium and rechargable can be used with the gauges, continuous use at 1 reading per second