EPHIPOT EP2J-63KVA 单相接触式电压调节器 (0~250V; 252A)

Working Conditions:

-The altitude does not exceed 1000m.

-Indoor use.

-The average relative humidity in the wettest month is below 90%, and the average minimum temperature in the month is 25℃.

Maximum ambient temperature +40℃.

Maximum daily average temperature +30℃

Maximum annual average temperature +20℃

Minimum temperature -5℃

-There should be no gas, steam, dust, dirt, chemical deposits and other explosive and aggressive media that seriously affect the insulation of the voltage regulator.

-There should be no serious vibration and bumps in the installation site.

-The waveform of the power supply voltage is similar to a sine wave.

-The three-phase power supply voltage is approximately symmetrical.

Technical Specifications:

- Output range(V): 0~250

- Output current(A): 252

- Frequency: 50-60Hz

- Recommended lead cross-section mm2: 50

- Dimension: L*W*H(cm): 120*70*170

General Information:

By changing the position of the contact position of the brush and the polished surface of the ring-shaped winding to change the turns ratio of the primary and secondary windings, the regulator that finally achieves the main purpose is called a ring regulator. Ring contact type electric voltage regulator is a large contact type electric voltage regulator, which is a replacement product of inductive voltage regulator. Appearance, weight, volume, efficiency, waveform, operation, installation and maintenance are better than the same power induction voltage regulator. Suitable for industrial and mining power, hospitals, national defense, scientific research and other departments as a continuously adjustable test power supply.