FLIR A700 固定式热像仪 (Advanced Configuration)

Detector Data

Detector pitch: 17 µm

IR resolution: 640 x 480

Visual resolution: 1280 × 960

Focal plane array/spectral range: <30 mK to <50 mK, lens dependent

Lenses: 6°, 14°, 24°, 42°, 80°, FlexView® Dual FOV (24°/14°), FlexView® Dual FOV (42°/24°) lenses

IR camera focus: One-shot contrast, motorized, manual

Measurement

Object temperatures: -20°C to 120°C (-4°F to 248°F)

0°C to 650°C (32°F to 1202°F)

A700: 300°C to 2000°C (572°F to 3632°F)

Accuracy: ±2°C (±3.6°F) or ±2% of reading

Measurement analysis

Standard functions: 10 spotmeters, 10 boxes & mask polygons, 3 Deltas, 2 isotherm, 2 iso-coverage, 1 reference temperature, 2 lines, 1 polyline

Automatic hot/cold detection: Max./min. temperature value and position shown within box

Scheduled response: SFTP (image), SMTP (image and/or measurement data/result)

Measurement frequency: Up to 10 Hz

Measurement result read-out: Yes; common protocols include EtherNet/IP, Modbus TCP, MQTT, and REST API

Dynamic Range: 16-bit

Alarm

Alarm function: On any selected measurement function; digital in; internal camera temperature

Alarm output: Yes: common output includes e-mail, EtherNet/IP, Modbus TCP, RESTful API, and ONVIF (advanced only)

Video streaming, RTSP protocol

Unicast: Yes

Multicast: Yes

Multiple image streams: Yes

RTSP protocol - video stream 0

Source: Visual, IR, MSX®

Contrast enhancement: FSX®, histogram equalization (IR only)

Overlay: With, without

Pixel format: YUV411

Encoding: H.264/MPEG4/MJPEG

RTSP protocol - video stream 1

Source: Visual

Overlay: No

Pixel format: YUV411

Encoding: H.264/MPEG4/MJPEG

Radiometric streaming

Source: IR

Pixel format: MONO 16

Encoding: Compressed JPEG-LS; FLIR radiometric

Ethernet

Interface: Wired; Wi-Fi*

Connector types: M12 8-pin X-coded, female; RP-SMA, female

Ethernet type & standard: 1000 Mbps, IEEE 802.3

Ethernet power: Power over Ethernet, PoE IEEE 802.3af class 3

Ethernet protocols: Include EtherNet/IP, Modbus TCP, and MQTT

Digital input/output

Connector type: M12 Male 12-pin A-coded (shared with ext. power)

Digital input: 2× opto-isolated, Vin (low) = 0-1.5 V, Vin (high) = 3-25 V

Digital output: 3× opto-isolated, 0–48 V DC, max. 350 mA (derated to 200 mA at

60°C). Solid-state opto relay, 1× dedicated as fault output (NC)

Power system

Connector type: M12 Male 12-pin A-coded (shared with Digital I/O)

Power consumption: 7.5 W at 24 V DC typical; 7.8 W at 48 V DC typical; 8.1 W at 48 V PoE typical

Wi-Fi*

Connector type: Female RP-SMA

General

Base Mounting: 4× M4 on 4 sides

Housing material: Aluminium

Size (L x W x H): 123 × 77 × 77 mm (4.84 × 3.03 × 3.03 in)

Weight: 0.82 kg (1.8 lb), camera only

Datasheet