快速支持
直接联系认证专家
Digital I/O connector type: Terminal block inside housing
Digital Inputs: 2x opto-isolated, Vin(low)= 0–1.5 V, Vin(high)= 3–25 V
Digital Output Purpose: • As a function of alarm, output to external device • Fault (NC)
Digital Outputs: 3x opto-isolated, 0–48 V DC, max. 350 mA; solid-state opto relay; 1x dedicated as Fault output (NC)
Encoding: Video stream: H.264, MPEG4, or MJPEG Radiometric stream: Compressed JPEG-LS, FLIR radiometric
Ethernet Interface: Wired
EMC: EN50130-4, EN61000-6-3, EN55022 Classe B, FCC Part. 15 Class B
Mounting: Bought separately, pole and wall adaptors available
f-number: 1.3, 80°
Accuracy: ±2°C (±3.6°F) or ±2% of reading, for ambient temperature 15° to 35°C (59° to 95°F) and object temperature above 0°C (32°F)
Alarm Functions: On any selected measurement function, digital in, and internal camera temperature
Alarm Output: • Digital out • E-mail (SMTP) (push) • Ethernet/IP • File transfer (FTP) (push) • Modbus TCP server (pull) • MQTT (push) • Query over RESTful API (pull) • Store image or video
Communication & Data Storage
Digital I/O connector type: Terminal block inside housing
Digital I/O isolation voltage: 500 VRMS
Digital input purpose: NUC, NUC disable, alarm
Digital Inputs: 2x opto-isolated, Vin(low)= 0–1.5 V, Vin(high)= 3–25 V
Digital Output Purpose: • As a function of alarm, output to external device • Fault (NC)
Digital Outputs: 3x opto-isolated, 0–48 V DC, max. 350 mA; solid-state opto relay; 1x dedicated as Fault output (NC)
Encoding: Video stream: H.264, MPEG4, or MJPEG Radiometric stream: Compressed JPEG-LS, FLIR radiometric
Ethernet: For control, result, image, and power
Ethernet Communication: TCP/IP socket-based FLIR proprietary
Ethernet Connector Type: IP67 rated RJ45 port
Ethernet Interface: Wired
Ethernet Power: Power over Ethernet, PoE IEEE 802.3af class 3
Ethernet Protocols: • EtherNet/IP • IEEE 1588 • Modbus TCP • MQTT • SNMP • TCP, UDP, SNTP, RTSP, RTP, HTTP, HTTPS, ICMP, IGMP, sftp (server), FTP (client), SMTP, DHCP, MDNS (Bonjour), uPnP
Ethernet Standard: IEEE 802.3
Ethernet Type: 10/100Base-T
Image Storage: Records up to 100 FLIR radiometric JPEG; storage as function of: alarm, scheduling, or user interaction (camera web)
Multicast: Yes
RS-232: M8 A-coded, male connector directly on camera, inside housing
Imaging & Optical
Contrast Enhancement: FSX® / Histogram equalization (IR only)
Detector Pitch: 17 µm
Detector Time Constant: Typical 10 ms
Field of view (FOV): 80° × 63°
f-number: 1.3, 80°
Focal Length: 5 mm (0.19 in)
Focal Plane Array (FPA): Uncooled microbolometer
IR Resolution: 464 × 348
Lens Identification: Automatic
Minimum Focus Distance: 0.1 m (3.9 in)
MSX: NA
Multi-Streaming: Yes
Overlay: With / Without
Radiometric IR video streaming: RTSP protocol to FLIR Atlas SDK
Readout Measurement results: • Ethernet/IP • Modbus TCP server (pull) • Modbus TCP client (push) • MQTT (push) • REST API (GET/POST) • Measurements and still image (radiometric JPEG) • Web interface
Spatial resolution (IFOV): Dependent on the IR resolution of the camera: 320 × 240 pixels: 5.2mrad/pixel 464 × 348 pixels: 3.6 mrad/pixel 640 × 480 pixels: 2.6 mrad/pixel
Spectral Range: 7.5–14 µm
Streaming Resolution: Video stream 0: 640 × 480 pixels
Radiometric stream: 464 × 348 pixels
Video Streaming: RTSP protocol
Measurement & Analysis
Accuracy: ±2°C (±3.6°F) or ±2% of reading, for ambient temperature 15° to 35°C (59° to 95°F) and object temperature above 0°C (32°F)
Alarm Functions: On any selected measurement function, digital in, and internal camera temperature
Alarm Output: • Digital out • E-mail (SMTP) (push) • Ethernet/IP • File transfer (FTP) (push) • Modbus TCP server (pull) • MQTT (push) • Query over RESTful API (pull) • Store image or video
Atmospheric transmission correction: Based on inputs of distance, atmospheric temperature, and relative humidity
Automatic hot & cold detection: Max./min. temperature value and position shown within box
Measurement Corrections: Global object parameters; local parameters per analyze function
Measurement Presets: Yes
Measurement Tools: 10 spotmeters, 10 boxes or mask polygons, 3 Deltas (difference any value/reference/external lock), 2 isotherms (above/below/interval), 2 iso-coverage, 1 reference temperature, 2 lines, 1 polyline Maximum 12 measurement functions at the same time.
Object Temperature Range: –20° to 120°C (–4° to 248°F) 0° to 650°C (32° to 1202°F) 300° to 1500°C (572° to 2732°F)
General
Housing material: Aluminium housing, sunshield in ABS
Size (L x W x H): 51.5×17.7×22.9 cm (20.28×6.97×9.02 in)
Environmental & Certifications
EMC: EN50130-4, EN61000-6-3, EN55022 Classe B, FCC Part. 15 Class B
Encapsulation: IP67
Mounting: Bought separately, pole and wall adaptors available
ONVIF Conformance: Yes. ONVIF Profile S
Operating Temperature Range: -30°C to 50°C (-22°F to 122°F)
Power
Power Consumption: 30W PoE, PoE+, Type 2. IEEE 802.3af, IEEE 802.3at/PoE Plus
