Gigahertz-Optik LCR-20 UV reflection measurement device (254mm)

-Measurement range: 

Spectral range: 254 nm

Detection: Reflection

-Typical applications: 

Measurement of the UV reflection of surfaces for e.g. UV disinfection installations.

-Calibration: Relative measurement methode with 100 % reference adjustment.

-Measurement geometry: 45°/45° and 45°/0° geometry

-Light Source: UV LED collimated with monitor detector

-Sensor: UV-3725

-Spectral range: 254 nm LED Peak +/-LED tolerance

-Calibration: 

Relative measurements after performing 100% match against air.

Traceable measurements after matching with calibrated standard filters.

-Housing: Aluminum housing (light source) and external detector for switching between positions, with external X1-5 V01.

-Control electronics:  X1 Optometer, special firmware version for LCR-20 (X1-5 V01), but can also be used with any -5 detector.

-Spot Diameter: 10 mm

-Temperature range: 10°C to 40°C

-Humidity: Above the saturation temperature

-Electrical connection: USB power supply light source / charging

Datasheet