快速支持
直接联系认证专家
Mobile sampler with attached cooling unit.
Operating Temperature: 32° to +158°F (0° to +70°C)
Materials:
Enclosure: Expanded UV protected PVC
Bottle: 2.5 gallon Polyethylene
Pickup Hose: 15' reinforced PVC 1/4" ID polyethylene flexible tubing section with intake strainer
Pump Tubing: Norprene 1/4" ID, 7/16" OD
Sample Pump:
Flow Rate: 1000 ml per minute at a 4 foot head
Type: Peristaltic
Maximum Lift: ~20 feet
Battery: Rechargeable 5 AH Gel Cell
Battery Life: ~1 hour, continuous pumping under load
Standby: 3 months while still retaining enough power to run the pump to capacity
Start Delay: 16 time settings from 0 to 12 hours
Composite Interval: 15 time settings from 5 min. to 12 hours plus an External Trigger mode setting
Sample Size: 15 composite sample sizes from 50ml to 2 liters plus a Full Bottle discrete setting (Approximate sizes at 4 foot head)
External Trigger Input: 250mS minimum pulse width
Switch closure or 4-24VDC
Pulse Output: 5VDC one-second pulse
1000ohm output impedance
Bottle Switch Input: Switch closure Input
Floating switch in bottle
Rain and Water Sensors: Optional moisture sensors or switch closure inputs
Internal Fuse: 10A Slow-Blow
Size of unit: 22x17x9 inch (56x43x23 cm) (HxWxD)
Weight: 20 lb (9 kg)
