Gossen Metrawatt METRALINE CM 400 Current Clamp (400 A AC/DC)

Display; LCD; 7 segments, 4-digit display, backlight; Current, voltage, resistance, capacitance, frequency, continuity, diode, polarity (- for negative values); NCV, LPF, Hold, Min/Max, Zero, automatic switch-off, battery check

LEDs: Flashlight, NCV

Voltage measurement :1 mVAC … 1000 VAC TRMS, 1 mVDC … 1500 VDC

Overload protection - high impedance: 10 MΩ voltage measurement

Current measurement:

Clamp: 0.2 AAC … 400 AAC TRMS, 0.01 ADC … 400 ADC

Socket: 2 µAAC … 400 µAAC TRMS, 2 µADC … 400µADC

Resistance measurement: 0 Ω … 40 MΩ

Capacitance measurement: 10 nF … 100 µF

Continuity test: < 30 Ω acoustic signal

Reversing point: 0 Ω to 30 Ω (± 20 Ω)

Diode test: 0 V … 1.0 V

Frequency measurement: 1 Hz … 9.99 MHz

Clamp opening: 35 mm, oval

Distance of measuring cables: 25 mm

TRMS: Yes

NCV (non-contact voltage measurement): Yes (AC only)

LPF (low-pass filter): Yes, 1 kHz / –3 dB

Flashlight: Yes

Automatic shutdown: Yes

Self-test: Yes

Measuring category: CAT IV / 1000 V

Pollution degree: 2

Power supply: Batteries, 2 × 1.5 V AAA, IEC LR03

Dimensions Approx. 220 × 80 × 42 mm

Weight Approx. 268 g (without batteries)

Datasheet