快速支持
直接联系认证专家
Input: AC110-240V
Overall dimension: 205*126*153
Application scenario: Rotating disc type
Exportation: DC15V
Net weight: About 2.8kg
Nut specification: M4.0
Hexagonal opposite side dimensions (mm): 6.8-7
Nut thickness (mm): 2.9-3.2
Pitch (mm): 0.7
Product Details
1. This product is a medium-sized rotating disk nut arrangement machine, suitable for a variety of manual and automatic screw lock equipment feeding system, with signal terminal, easy to communicate with the equipment.
2. Wide range of application
Widely applicable to national standard M1.6-M6.0 and other types of nut arrangement output.
3. It runs smoothly
The nut runs in the roller, and any nut that does not enter the track in the correct direction will fall into the roller and enter the next cycle, and it is not easy to get stuck in normal use.
4. Work efficiency can be adjusted
Feed and vibration independent control, can freely set the ideal delay time, gear feeding turntable and four degree takeout disk can be independently controlled, according to different nuts and set the speed of the turntable, adjust the nut feeding and dividing speed, suitable for a variety of operations.
5. Can greatly improve production efficiency
The nut is automatically divided (90°) to the outlet position, and the material can be taken directly without manual correction, greatly improving the production efficiency.
6. With nut counting function
The nut arrangement machine is equipped with a digital display panel, through which the setting parameters can be personalized adjusted, and has the function of automatic nut counting.
7. Fault alarm function
When the material is stuck, the dial will automatically reverse, normal recovery after positive rotation, abnormal conditions occur abnormal, the arrangement will automatically start the alarm device (lack of material).
