快速支持
直接联系认证专家
The ultra-compact EASYCUT 40 is an 8 kg plasma cutter featuring a non-HF starting voltage, making it perfect for cutting all types of metal up to 20 mm thick. With a power output of 40 A, it is fantastic at precision cutting using a low current. This appliance is deal for workshops or car bodywork repair shops thanks to its excellent portability and cutting performance.
EFFICIENT
■ Its inverter technology guarantees quality cutting on all types of steels (soft, stainless, hardened and high-tensile), aluminium and copper, etc.
■ Quickly and easily set up consumables
ERGONOMIC TORCH
■ Effective cutting: an air cooled torch body provides greater arc stability and a high duty cycle.
■ Equipped with an ergonomic handle for comfort and ease.
■ Designed to be shock and heat resistant.
■ Connect and disconnect the torch quickly and without using any tools.
SIMPLE TO USE
■ Intuitive control panel.
■ Manually adjust the air pressure (2.5 < 6.5 bar) with a bargraph on the front panel.
■ Automatic torch detection.
■ Non-HF ignition prevents disturbances that could damage nearby electronic equipment.
SAFE
Built-in protections:
- Protected against overvoltage and overcurrent.
- Indication of insufficient air pressure or torch detection.
ERGONOMIC
■ Reinforced structure with isolated non slip rubber pads.
■ HMI protective cover.
■ The torch and earth clamp can be disconnected.
■ Compact, lightweight and portable.
Specifications
Power Supply: 230 V, 1 ph, 50/60 Hz
Fuse: 16 A
Cutting current range: 10-40 A
Duty cycle (environment temp. 40°C)
Imax 40 A / 96 V
@ 60% 10 A / 84 V
No load voltage: 440 V
Recommended air flow rate: 115 L/min
Recommended air pressure: 2.5 > 6.5 bar
Protection class: IP 21
Dimensions (L x w x h): 42 x 15 x 30 cm
Weight; 8 kg
Standard IEC 60974-1/10 A
Equipped torch: TPT TPT 40 - 4 m
Included accessories: Torch TOPARC TPT 40, 4 m + Earth cable 2 m
