HILO-test PG 5-200 High Voltage Pulse Generator (0.2 - 5 kV; 90V - 264V)

Be designed for dielectric testing of components and systems as well as testing of the electromagnetic compatibility of electronic systems and devices acc. to CCITT-K17/K20/K22, ITU-T/K44, IEC 61000-4-5 etc.

Mainframe

Microprocessor controlled touch panel: 7”, capacitive

Optical Ethernet Interface for remote control of the generator: optional

Interface for saving reports: USB

External Trigger input / output: Switch / 10 V

Connector for external safety interlock loop and external red and green warning lamps acc. to VDE 0104: 24 V=, 40mA

Mains power: 90V - 264V, 50/60 Hz

Dimensions: desk top case W * H * D: 450 * 180 * 500

Weight: 22 kg

High- Voltage Pulse Generator: acc. to IEC 61000-4-4: 2012

Impulse output voltage, adjustable ± 10%: 0.2 - 5 kV, 0.5 – 10 kV

Waveform of impulse output voltage: Selectable (acc. to IEC 60600) Tol. ± 30/±20%

Surge waveform, acc. IEC60600-1: 1.2/50µs, 10/700µs

Waveform of impulse output current at 10/700µs network, front time/tail time: 5/320 µs

Output polarity, selectable: pos / neg /alt

Trigger:

a) manual: push button

b) external: Trigger input switch

c) internal: automatic

Repetition time, selectable: 5-1000 s, 20-1000 s

Impulse voltage divider, built-in: v= 1000:1 ± 2 %, 50 W

Current Sense: acc. to IEC 61000-4-4: 2012

Threshold value, selectable: 1-3000 µAs(1,2/50µs)

Current sense working range: 0.2 kV - 5kV

Impulse voltage divider, built-in: ratio 1000:1 ± 5%

HV output: HV-OUT HV connector

Mains synchronous triggering, phase shifting: 0 - 360 °, step 1°

Accessories

Mains cable, key, operation instructions:

Datasheet