HINOTEK Bante540 水质多参数计

Conductivity:

   Measuring range: 0.01~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm

   Display resolution: 0.001, 0.01, 0.1, 1

   Measurement accuracy: ±0.5% FS

   Calibration point: 1 to 5 points

   Calibration solution: 10µS, 84µS, 1413µS, 12.88mS, 111.8mS

TDS:

   Measuring range: 0.00~10.00, 100.0, 1000ppm, 10.00, 200.0ppt

   Display resolution: 0.01, 0.1, 1

   Measurement accuracy: ±1% FS

   TDS conversion factor: 0.1 to 1.0 (default 0.5)

Salinity:

   Measuring range: 0.00~80.00ppt, 0.00~42.00psu

   Display resolution: 0.01

   Measurement accuracy: ±1% FS

Resistivity:

   Measuring range: 0.00~20.00MΩ

   Display resolution: 0.01

   Measurement accuracy: ±1% FS

Temperature:

   Measuring range: 0~105°C/32~221°F

   Display resolution: 0.1°C/0.1°F

   Measurement accuracy: ±0.5°C/±0.9°F

   Offset calibration: 1 point, measured value ±10°C

General parameters:

   Temperature compensation range: 0~100°C/32~212°F, manual or automatic

   Temperature compensation coefficient: Linear (0.0~10.0%/°C), pure water

   Reference temperature: 20/25°C

   Conductivity cell constant: K=0.1, 1, 10 or customized

   Calibration due reminder: 1 to 31 days or closed

   Automatic shut-down: 10, 20, 30 minutes after no key operation

   Data storage: 500 groups

   Communication output: USB

   Connector: 6-pin DIN, 3.5mm microphone jack

   Display screen: Custom LCD display (80×60mm)

   Power type: 3 AA batteries or DC5V power adapter

   Dimensions: 170(L)×85(W)×30(H)mm

   Meter weight: 300g

Datasheet

Manual