HINOTEK Bante900P 便携式 pH离子/电导/溶解氧 Meter (-2.000 - 20.000pH, ±1999.9mV)

pH:

   Range: -2.000 to 20.000pH

   Resolution: 0.001, 0.01, 0.1pH, selectable

   Accuracy: ±0.002pH

   Calibration Points: 1 to 5 points

   pH Buffer Options: USA, NIST, DIN, 2 custom buffers

ORP:

   Range: ±1999.9mV

   Resolution: 0.1, 1mV, selectable

   Accuracy: ±0.2mV

   Calibration Points: 1 point

   Measurement Modes: Relative or absolute mV

Ion Concentration:

   Range: 0.001 to 19999 (depending on the range of ISE)

   Resolution: 0.001, 0.01, 0.1, 1

   Accuracy: ±0.5% F.S. (monovalent), ±1% F.S. (divalent)

   Calibration Points: 2 to 5 points

   Calibration Solutions: 0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000

   Measurement Units: ppm, mg/L, mol/L, mmol/L

Conductivity:

   Range: 0.01 to 20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm

   Resolution: 0.001, 0.01, 0.1, 1

   Accuracy: ±0.5% F.S.

   Calibration Points: 1 to 5 points

   Calibration Solutions: 10µS, 84µS, 1413µS, 12.88mS, 111.8mS

   Temperature Coefficient: Linear (0.0 to 10.0%/°C), pure water

   Reference Temperature: 20/25°C

   Cell Constant: K=0.1, 1, 10 or custom

TDS:

   Range: 0.00 to 10.00, 100.0, 1000ppm, 10.00, 200.0ppt

   Resolution: 0.01, 0.1, 1

   Accuracy: ±1% F.S.

   TDS Factor: 0.1 to 1.0 (default 0.5)

Salinity:

   Range: 0.00 to 80.00ppt, 0.00 to 42.00psu

   Resolution: 0.01

   Accuracy: ±1% F.S.

Resistivity:

   Range: 0.00 to 20.00MΩ

   Resolution: 0.01

   Accuracy: ±1% F.S.

Dissolved Oxygen:

   DO Range: 0.00 to 20.00mg/L

   Resolution: 0.01, 0.1mg/L, selectable

   Accuracy: ±0.2mg/L

   % Saturation of Oxygen: 0.0 to 200.0%

   Resolution: 0.1, 1%, selectable

   Accuracy: ±2.0%

   Calibration Points: 1 or 2 points

   Pressure Correction: 60.0 to 112.5kPa/450 to 850mmHg, manual

   Salinity Correction: 0.0 to 50.0g/L, manual

Temperature: 

   Range: 0 to 105°C/32 to 221°F

   Resolution: 0.1°C/0.1°F

   Accuracy: ±0.5°C/±0.9°F

   Offset Calibration: 1 point

   Calibration Range: Reading ±10°C

General Specifications:

   Temperature Compensation: 0 to 100°C/32 to 212°F, manual or automatic

   Stability Criteria: Low or high

   Calibration Due Alarm: 1 to 31 days or off

   Auto-Power Off: 10, 20 or 30 minutes after last key pressed

   Memory: Stores up to 500 data sets

   Output: USB communication interface

   Connector: BNC, 6-pin nimi-DIN, 3.5mm jack socket

   Display: Custom LCD (80×60mm)

   Power: 3×1.5V AA batteries or DC5V power adapter

   Battery Life: Approximately 150 hours (turn off the backlight)

   Dimensions: 170(L)×85(W)×30(H)mm

   Weight: 300g

Datasheet

Manual