HIOKI DT4261 数字万用表 (600mV ~ 1000VAC/DC, 600mA~10AAC/DC)

DC Voltage range 

600.0 mV to 1000 V, 5 ranges

Basic accuracy: ±0.15% rdg. ±2 dgt.

AC Voltage range

6.000 V to 1000 V, 4 ranges

Frequency characteristics: 40 Hz to 1 kHz

Basic accuracy 40 Hz - 500 Hz: ±0.9% rdg. ±3 dgt. (True RMS, crest factor 3 or less)

DC + AC Voltage range

6.000 V to 1000 V, 4 ranges

Frequency characteristics: DC, 40 Hz to 1 kHz

Basic accuracy DC, 40 Hz - 500 Hz: ±1.0% rdg. ±13 dgt. (True RMS, crest factor 3 or less)

LoZ V

600.0 V, 1 range

Frequency characteristics: DC, 40 Hz to 1 kHz

Basic accuracy DC, 40 Hz - 500 Hz: ±1.0% rdg. ±13 dgt. (True RMS, crest factor 3 or less)

Resistance range

600.0 Ω to 60.00 MΩ, 6 ranges

Basic accuracy: ±0.7% rdg. ±3 dgt.

DC Current range: 

600.0 mA to 10.00 A, 3 ranges

Basic accuracy: ±0.5% rdg. ±3 dgt.

AC Current range

600.0 mA to 10.00 A, 3 ranges

Basic accuracy 40 Hz - 500 Hz: ±1.4% rdg. ±3 dgt. (True RMS, crest factor 3 or less)

Frequency characteristics: 40 Hz to 1 kHz

AC Current range (use with Clamp on probes)

10.00 A to 1000 A, 7 ranges

Basic accuracy 40 Hz - 500 Hz: Add the Clamp on probe accuracy to ±0.9% rdg. ±3 dgt.(True RMS, crest factor 3 or less)

Capacitance range

1.000 μF to 10.00 mF, 5 ranges

Basic accuracy: ±1.9% rdg. ±5 dgt.

Continuity Check

Continuity threshold ON : 25 Ω

Continuity threshold OFF : 245 Ω

Response time: 0.5 ms or more

Diode test

Open terminal voltage: 2.0 V or less

Testing current: 0.2 mA or less, Threshold of forward voltage: 0.15 V to 1.8 V

Voltage frequency range

99.99 Hz to 99.99 kHz, 4 ranges (Limited by minimum sensitivity voltage)

Basic accuracy: ±0.1% rdg. ±1 dgt

Current frequency range

99.99 Hz to 9.999 kHz, 3 ranges (Limited by minimum sensitivity current)

Basic accuracy: ±0.1% rdg. ±1 dgt

Harmonic levels: [With Z3210 installed] Voltage/Current harmonic levels up to 30th, Content factor, Total harmonic distortion ratio

Harmonics can be displayed with our free app GENNECT Cross.

Display

Main and sub displays: 4-digits LCD, max. 6000 digits (excluding frequency measurement), bar-graph

Display refresh rates: 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 times/s)

Power supply: LR6 (AA) alkaline batteries × 3, Continuous operating time: 130 hr. (without Z3210 installed), 70 hr. (with Z3210 installed and using wireless communications)

Dimensions and mass: 87 mm (3.43 in.) W × 185 mm (7.28 in.) H × 47 mm (1.85 in.) D, 480 g (16.9 oz.) (with test leads holder and batteries)

Included accessories: Test Lead L9300 × 1, Instruction Manual × 1, LR6 (AA) alkaline battery × 3, Operating Precautions ×1

Datasheet