快速支持
直接联系认证专家
Specification
- Number of channels: 4 analog channels + 8 logic channels
- Measurement ranges: 10 mV to 100 V/div, 13 ranges, resolution: 1/640 of range
- Max. allowable input:
+ Between terminals: 600 VAC, DC
+ Between terminal to earth: 600 VAC, DC CAT III, 300 VAC, DC CAT IV
- Frequency characteristics: DC to 100 kHz (±3dB)
- Time axis: 100 μs to 100 ms/div, 10 ranges, Sampling period: 1/100 of range
- Measurement functions: High-speed function (high speed recording), Real-time function (actual time recording)
- Memory capacity: 14-bits × 1M-Words/ch (1 word = 2 bytes)
- External storage: CF Card slot ×1 (Up to 2 GB), USB 2.0 memory ×1
- Printing: 112 mm (4.41 in) × 18 m (59.06 ft), thermal paper roll, Recording speed : 10 mm (0.39 in)/sec
- Display: 5.7-inch VGA-TFT color LCD (640 × 480 dots)
- Displayable languages: English, Japanese, Chinese
- External interfaces: USB2.0
- Power supply:
+ AC ADAPTER Z1002: 100 to 240 VAC (50/60 Hz), 11 VA/40 VA khi dùng máy in
+ BATTERY PACK Z1000
+ Pin LR6 (AA)× 8
+ DC power supply: 10 to 28 VDC
- Dimensions, mass: 205×199×67mm, 2.16 kg
- Supplied accessories: Instruction Manual × 1, AC ADAPTER Z1002 × 1, Alkaline battery box × 1, Strap × 1, USB cable × 1, Application Disk
- The warrnty preiod: 12 month
| Number of channels | 4 analog channels + 8 logic channels (standard) Note: Isolated analog channels, isolated input and frame, logic has common GND |
| Measurement ranges (10 div full-scale) |
4 channels of voltage measurement; mode switchable between instantaneous waveform, or RMS value 10 mV to 100 V/div, 13 ranges, resolution: 1/640 of range RMS value mode: 30 Hz to 10 kHz, Crest factor: 2 |
| Max. rated voltage | Between terminals: 600 VAC, DC Between terminal to earth: 600 VAC, DC CAT III, 300 VAC, DC CAT IV |
| Frequency characteristics | DC to 100 kHz (±3dB) |
| Time axis (High-speed function) | 100 μs to 100 ms/div, 10 ranges, Sampling period: 1/100 of range |
| Recording intervals (Real-time function) | 100 μs to 1 minute, 19 selections (simultaneous sampling in all channels) |
| Measurement functions | High-speed function (high speed recording) Real-time function (actual time recording) |
| Memory capacity | 14-bits × 1M-Words/ch (1 word = 2 bytes) |
| Removable storage | CF Card slot ×1 (Up to 2 GB), USB 2.0 memory ×1 |
| Printing | [Printer unit is option] 112 mm (4.41 in) × 18 m (59.06 ft), thermal paper roll, Recording speed : 10 mm (0.39 in)/sec Note: Printing is not supported when using alkaline batteries |
| Display | 5.7-inch VGA-TFT color LCD (640 × 480 dots) |
| Displayable languages | English, Japanese, Chinese |
| Communication interfaces | USB 2.0 mini-B receptacle × 1; Transfers files from the installed CF card or USB memory stick to a PC when connected, and External PC control |
| Power supply | AC ADAPTER Z1002: 100 to 240 VAC (50/60 Hz), 11 VA (when Real-time recording) , 40 VA (when Real-time recording and printing) BATTERY PACK Z1000: AC adapter has priority when used in combination with battery pack, recharge with AC adapter 3 hours, Continuous use 3 hours (at back-light ON) LR6 (AA) alkaline batteries × 8, Continuous use 40 minutes, (with back-light ON, cannot be used with the PRINTER UNIT) DC power supply: 10 to 28 VDC (cable available by special order) |
| Dimensions and mass | 205 mm (8.07 in) W × 199 mm (7.83 in) H × 67 mm (2.64 in) D, 1.66 kg (58.6 oz) (with the BATTERY PACK installed) When printer is combined - with main unit: 303 mm (11.93 in) W × 199 mm (7.83 in) H × 67 mm (2.64 in) D, 2.16 kg (76.2 oz) (with the BATTERY PACK installed) |
| Accessories | Instruction Manual × 1, AC ADAPTER Z1002 × 1, Alkaline battery box × 1, Strap × 1, USB cable × 1, Application Disk (Wave Viewer Wv, Communication Commands table) × 1 |
Catalog
MR8880-20
product catalog.pdf (2.67 MB) (2013-06-25 updated)
