快速支持
直接联系认证专家
Power supply voltage: AC 220V 50Hz
Power: 250W
Spindle speed: 100rpm-2000rpm
Maximum depth of cutting depth: 47mm
Saw blade: Ø200mm×Ø25.4mm, Ø205mm×Ø32mm
Clamp jaw size: 54mm×40mm
Worktable size: 500mm×380mm
Size: 550mm×440mm×225mm; weight: 13kg
Standard Accessories:
1 cutting ruler
Saw blade protective cover 1
Edge sintered diamond saw blade (Ø200×Ø25.4×1.0mm) 1 piece
5 pieces of silicon carbide saw blades (Ø205×Ø32×1.2mm)
5 corundum saw blades (Ø205×Ø32×1.2mm)
Optional Accessories: geological slice cutting fixture
Production Feature:
HQG-200 manual fast cutting machine is suitable for rough machining of various crystal, ceramic, glass, rock and metallographic samples. It can use diamond saw blades, electroplated diamond saw blades and resin saw blades.
Installation Conditions: This equipment is required to be used at an altitude of less than 1000m, a temperature of 25℃±15℃, and a humidity of 55%Rh±10%Rh.
1. Water: The equipment is equipped with a self-circulating water tank (filled with pure water or deionized water)
2. Electricity: AC220V 50Hz, must be well grounded
3. Gas: None
4. Workbench: size 600mm×600mm×700mm, bearing more than 50kg
5. Ventilation device: required
